Ball bearings, Page 232

Bearing - 16009 DKF

45 × 75 × 10 mm. DKF bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - UC 310 CT

50 × 110 × 61 mm. Standalone insert ball bearing with a spherical outer ring, seal and M12×1.5 set-screw fixing.

Bearing - 6017 2RS ZVL

85 × 130 × 22 mm. Deep-groove ball bearing with rubber seals on both sides for machinery applications.

Bearing - 51118 A ZKL

90 × 120 × 22 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.

Bearing - 2209 K ZVL

45 × 85 × 23 mm. ZVL bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - 5214 A SKF

bearing for industrial applications. Verify the complete designation, dimensions, design and application requirements in the manufacturer documentation before selection.

Bearing - 51205 ZKL

25 × 47 × 15 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.

Bearing - 3205 2RS CX

25 × 52 × 20 mm. Rubber seals on both sides.

Bearing - 2216 SKC3 NTN

80 × 140 × 33 mm. NTN bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - 2211 K ZKL

55 × 100 × 25 mm. ZKL bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - 2205 2RS neu

25 × 52 × 18 mm. neu bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - 16013 CX

65 × 100 × 11 mm. CX bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - 16009 M GPZ

45 × 75 × 10 mm. GPZ bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - 6311 2ZR FAG

55 × 120 × 29 mm. Metal shields on both sides.

Bearing - 6309 2Z DPI

45 × 100 × 25 mm. Metal shields on both sides.

Bearing - 6021 M C3 SLF

105 × 160 × 26 mm. Greater radial internal clearance.

Bearing - 6300 2ZC3 ZKL

10 × 35 × 11 mm. Rolling bearing for use in machinery and equipment.

Bearing - 2205 URB

25 × 52 × 18 mm. URB bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.