Ball bearings, Page 245

Bearing - 16007 MA P539 ZKL

35 × 62 × 9 mm. ZKL bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - SS 6205 2RS CRB

25 × 52 × 15 mm. Rubber seals on both sides.

Bearing - 6214 M C3 STEYR

70 × 125 × 24 mm. Bearing with increased radial internal clearance for use in machinery and equipment.

Bearing - 3307 FAG

35 × 80 × 31 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 1203 ZVL

17 × 40 × 12 mm. bearing with the verified designation. Compare the complete designation, dimensional data and design with the original part. Confirm suitability for the specific bearing arrangement in ZVL documentation.  

Bearing - SS 6003 2RS CRB

17 × 35 × 10 mm. Rubber seals on both sides.

Bearing - 2304 2RS TVH FAG

20 × 52 × 21 mm. Rubber seals on both sides.

Bearing - 1312 TVH FAG

60 × 130 × 31 mm. FAG bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - 51205 FAG

25 × 47 × 15 mm. Bearing. Verify the complete designation and dimensions in manufacturer documentation before selection.

Bearing - 51110 FAG

50 × 70 × 14 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.

Bearing - 6312 FAG

60 × 130 × 31 mm. Rolling bearing for use in machinery and equipment.

Bearing - 6304 2RS SKF

20 × 52 × 15 mm. Rubber seals on both sides.

Bearing - 6214 FAG

70 × 125 × 24 mm. Rolling bearing for use in machinery and equipment.

Bearing - 6211 2RS SKF

55 × 100 × 21 mm. Rubber seals on both sides.

Bearing - 6008 FAG

40 × 68 × 15 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 61900 2RS SKF

10 × 22 × 6 mm. Rubber seals on both sides.

Bearing - QJ219N2MA/C4B20 SKF

four-point contact ball bearing with split inner ring, brass cage, C4 clearance and N2 design.