Ball bearings, Page 330

Bearing - 62200 2RS1 SKF

Rubber seals on both sides.

Bearing - 6210 K ZKL

50 × 90 × 20 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 6203 2Z MGM

17 × 40 × 12 mm. Metal shields on both sides.

Bearing - 6203 2Z DPI

17 × 40 × 12 mm. Metal shields on both sides.

Bearing - 6200 2ZR ZKL

10 × 30 × 9 mm. Deep groove ball bearing, shielded on both sides (2Z).

Bearing - 61807 2RS1 SKF

35 × 47 × 7 mm. Rubber seals on both sides.

Bearing - 6011 2NSL NACHI

55 × 90 × 18 mm. Single-row deep-groove ball bearing with contact seals on both sides. Verify suitability by the complete designation and application. Bore diameter d = 55 mm, outside diameter D = 90 mm, width B = 18 mm.

Bearing - 6007 2Z P6 ZKL

35 × 62 × 14 mm. Metal shields on both sides. Higher accuracy class P6.

Bearing - 6006 FAG

30 × 55 × 13 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 6006 2RS neu

30 × 55 × 13 mm. Single-row deep groove ball bearing, sealed on both sides (2RS).

Bearing - 52216 ZKL

Bearing.

Bearing - 51405 ZKL

25 × 60 × 24 mm. Before ordering, compare the complete designation with the original part and confirm the design in the manufacturer documentation.

Bearing - 51205 ZVL

25 × 47 × 15 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.

Bearing - 51201 neu

12 × 28 × 11 mm. neu 51201 thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.

Bearing - 51113 ZKL

65 × 90 × 18 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.

Bearing - 3200 FAG

10 × 30 × 14 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 3200 A 2Z TN9 MT33 SKF

10 × 30 × 14 mm. Metal shields on both sides. Injection moulded cage of glass fibre reinforced polyamide 66.

Bearing - 2307 K FLT

35 × 80 × 31 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.