Ball bearings, Page 357

Bearing - 61805 SKF

25 × 37 × 7 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 609 URB

9 × 24 × 7 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 6019 ZKL

95 × 145 × 24 mm. Bearing for use in machinery and equipment.

Bearing - 6016 ZKL

80 × 125 × 22 mm. Bearing for use in machinery and equipment.

Bearing - 6016 2Z SKF

80 × 125 × 22 mm. Metal shields on both sides. Deep-groove ball bearing for machinery applications.

Bearing - 6015 M SKF

75 × 115 × 20 mm. Machined brass cage.

Bearing - 6012 Z ZKL

60 × 95 × 18 mm. Metal shield on one side.

Bearing - 6012 2RSR FAG

60 × 95 × 18 mm. Rubber seals on both sides.

Bearing - 6011 P6 ZKL

55 × 90 × 18 mm. Single-row deep-groove ball bearing with higher P6 precision class. Inner diameter d = 55 mm, outer diameter D = 90 mm, width B = 18 mm.

Bearing - 6008 2ZR KINEX

40 × 68 × 15 mm. Metal shields on both sides.

Bearing - 6007 MGM

35 × 62 × 14 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 6005 2Z ZKL

25 × 47 × 12 mm. Metal shields on both sides.

Bearing - 6000 C 2HRS C3 FAG

10 × 26 × 8 mm. Greater radial internal clearance.

Bearing - 53309 U STEYR

Bearing.

Bearing - 51406 ZKL

30 × 70 × 28 mm. Before ordering, compare the complete designation with the original part and confirm the design in the manufacturer documentation.

Bearing - 51306 N ZKL

30 × 60 × 21 mm. thrust ball bearing is designed to carry axial load. Always compare the full designation and design with the original bearing when selecting a replacement.

Bearing - 51209 P5 ZKL

45 × 75 × 20 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.

Bearing - 51200 DKF

10 × 26 × 11 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.