8 × 24 × 8 mm. single-row deep-groove ball bearing with non-contact metal shields on both sides for low friction and protection from ordinary contamination.
10 × 19 × 5 mm. thin-section single-row deep-groove ball bearing with non-contact metal shields on both sides for compact arrangements, low friction and protection from ordinary contaminants.
65 × 100 × 18 mm. single-row deep-groove ball bearing with rubber seals on both sides for improved protection of the lubricant and raceways in normally dusty or damp operation.
30 × 72 × 19 mm. SKF 6306-2Z/C3 single-row deep-groove ball bearing with non-contact metal shields on both sides and greater-than-normal C3 radial clearance.
25 × 52 × 15 mm. is a single-row deep-groove ball bearing with rubber seals on both sides. It protects the lubricant and raceways from common contaminants while carrying radial and limited axial loads.
17 × 47 × 14 mm. is a single-row deep-groove ball bearing with metal shields on both sides. It combines low friction, protection against common solid contaminants and support for radial and limited axial loads.
17 × 35 × 10 mm. is an open single-row deep-groove ball bearing with greater-than-normal C3 radial internal clearance. It suits radial and limited axial loads where operating conditions require additional internal clearance.
15 × 32 × 9 mm. is an open single-row deep-groove ball bearing with low friction for radial and limited axial loads in both directions. Its compact dimensions suit small electric motors and general machinery positions.
8 × 22 × 7 mm. is a single-row deep-groove ball bearing with one Z metal shield and very large C4 radial internal clearance. Its compact design supports radial and limited axial loads in both directions.
7 × 19 × 6 mm. is a miniature single-row deep-groove ball bearing with non-contact metal shields on both sides. It combines low friction, protection against common contaminants and support for radial and limited axial loads.
35 × 80 × 21 mm. is a single-row deep-groove ball bearing with contact rubber seals on both sides. It supports radial and limited axial loads while protecting the lubricant and raceways in commonly contaminated operation.
17 × 47 × 14 mm. is a single-row deep-groove ball bearing with contact rubber seals on both sides. It supports radial and limited axial loads while protecting the lubricant and raceways in commonly contaminated operation.
10 × 30 × 9 mm. is a single-row deep-groove ball bearing with contact rubber seals on both sides. It supports radial and limited axial loads while protecting the lubricant and raceways in commonly contaminated operation.
12 × 28 × 8 mm. Single-row deep groove ball bearing for common radial and moderate axial loads. Its versatile open design provides low friction, smooth running and straightforward relubrication.
30 × 72 × 19 mm. Single-row deep groove ball bearing with a rubber seal on one side. This versatile design for radial and moderate axial loads combines protection with access for lubrication from the open side.
30 × 47 × 9 mm. Thin-section single-row deep groove ball bearing with metal shields on both sides. Its compact cross-section, low friction and two-sided protection suit space-constrained rotating arrangements.
