Bearing - GE 30 GS 2RS IKO

Bearing - 23122M/C3 SKF

Bearing - is an open spherical roller bearing with two rows of symmetrical rollers, a solid brass M cage, cylindrical bore and increased C3 radial clearance. It has no seals, lubrication groove or holes, and standard precision. Dimensions: inner diameter d 110 mm, outer diameter D 180 mm, width B 56 mm; weight 5.51 kg. The spherical outer-ring raceway compensates for alignment errors and….

Bearing - 6208 2Z C3 SKF

40 × 80 × 18 mm. deep-groove ball bearing is a single-row bearing with steel shields on both sides and C3 radial internal clearance. It carries radial loads and moderate axial loads in both directions and is suitable for higher-speed operation.

Bearing - 6204 2RS CRAFT

20 × 47 × 14 mm. Rubber seals on both sides.

Bearing - 32026 X ZKL

Bearing.

Bearing - 6209 2Z C3 SKF

45 × 85 × 19 mm. SKF bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - ZARN3062-TV-A INA

double-direction combined needle roller and axial cylindrical roller bearing with TV polyamide cage and D1 62 mm flange.

Bearing - 51105 KINEX

25 × 42 × 11 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.

Bearing - 22209 E SKF

45 × 85 × 23 mm. Bearing for industrial rotating assemblies. Before selection, verify the complete designation, dimensions, and requirements of the specific application.

Bearing - YAR 207 2F SKF

35 × 72 × 42.9 mm. insert bearing has an inner ring extended on both sides and locks onto the shaft with two set screws. A spherical outside surface, contact seals with flingers on both sides and relubrication capability support easy installation and reliable operation.

Needle roller bearing - HK 3012 SKF

30 × 37 × 12 mm. needle roller bearing for replacement use. Dimensions d × D × B: 30 × 37 × 12 mm. Before ordering, compare the complete designation, dimensions and design with the original part.

Bearing - GE 50 E 2RS ZVL

50 × 75 × 35 mm. radial spherical plain bearing for oscillating motion, slow tilting and accommodation of angular misalignment. Seals on both sides help protect the sliding surfaces and retain lubricant.