Bearing - 6010 ZKL

55x78x16 mm
ZVL 51111 single-direction thrust ball bearing for purely axial loads acting in one direction; its separable design makes correct installation of the individual components easier.

35x72x17 mm

Single-row open ZKL 6207 deep groove ball bearing for radial loads and axial loads in both directions. The open design allows the lubrication method to be selected for the specific bearing arrangement.

75x110x12 mm
Open STEYR 16115 single-row deep-groove ball bearing with a slim cross-section. The unshielded and unsealed design provides direct access for lubrication but requires a clean and suitably lubricated installation.

30x47x9 mm

Thin-section, single-row NTN 6906 2RS deep groove ball bearing with contact rubber seals on both sides, CN clearance and a pressed-steel cage. The compact design is intended for sealed arrangements with limited radial space.

15x35x11 mm

Open FLT 6202 single-row deep-groove ball bearing for reliable radial and limited axial load carrying. Its versatile non-separable design suits a wide range of machinery applications.

25x37x7 mm

Single-row SKF 61805 2RS deep groove ball bearing with compact dimensions; the corresponding SKF catalogue designation is 61805-2RS1. Contact seals on both sides help retain the grease and protect the bearing against contamination.

40x90x25.25 mm

ZKL 30308 AJ2 single-row tapered roller bearing for high combined radial and axial loads. Its separable design accommodates axial load in one direction and allows accurate adjustment of clearance or preload during installation.

25x62x18.25 mm
KINEX 30305 A single-row tapered roller bearing for combined radial and axial loads acting in one direction; its separable design allows the cone assembly and outer ring to be mounted separately.

8x28x9 mm
KBS 638 2RS single-row deep-groove ball bearing with rubber seals on both sides for improved protection of the lubricant and raceways in normally dusty or damp operation.

12x55x11

Special neu TR55ZZ HIC0102 bearing with a 12 mm bore, 55 mm outside diameter and 11 mm width. Before ordering, compare the complete designation and the actual shielding design with the original component.