Bearing - 23224 M SKF

Bearing - 6201 ZD NSK

12 × 32 × 10 mm. single-row deep groove ball bearing for radial and moderate axial loads in both directions. The manufacturer-specific ZD suffix is part of the specification and the complete designation must be matched when replacing the bearing.

Bearing - 6303 2RS ZVL

17 × 47 × 14 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

Needle roller bearing - HK 1210 CX

HK1210 CX needle roller and cage assembly without seal, 12 × 16 × 10 mm, weight 0.0044 kg.

Bearing - 6307 2RS1 SKF

35 × 80 × 21 mm. bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against SKF documentation and the requirements of the specific application.

Bearing - 608 2Z C3 INA

8 × 22 × 7 mm. single-row deep-groove ball bearing with non-contact metal shields on both sides. A low-friction shielded design for radial and limited axial loads in both directions. The C3 suffix denotes greater-than-normal radial internal clearance.

Bearing - 6005 2RS ZVL

25 × 47 × 12 mm. Single-row deep-groove ball bearing with rubber seals on both sides. Check the complete designation and suitability for the specific application.

Bearing - 696 A2Z EZO

6 × 15 × 5 mm. EZO bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - SD 52 DIN 472 NEREZ NEU

Bearing.

Bearing - 6002 2RSH SKF

15 × 32 × 9 mm. Single-row SKF 6002-2RSH deep groove ball bearing in SKF Explorer performance class. NBR contact seals on both sides help retain the grease and protect the bearing against contamination.

Bearing - 2205 2RSTNG NSK

25 × 52 × 18 mm. NSK bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - 6001 2Z SKF

12 × 28 × 8 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. It combines low friction and lubricant retention with the ability to carry radial and moderate axial loads in both directions.

Bearing - 6203 2RS KINEX

17 × 40 × 12 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.