Bearing - 32210 FAG

Bearing - 6000 2RS ZVL

10 × 26 × 8 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

Bearing - NJ 2207 ZVL

35 × 72 × 23 mm. single-row cylindrical roller bearing with high radial load capacity. The NJ design locates the shaft axially in one direction and allows relative axial displacement of the rings in the opposite direction.

Bearing - SCH20 RHP

RHP bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - 30204 A KLF

20 × 47 × 15.25 mm. single-row tapered roller bearing for combined radial and axial loads acting in one direction. Its separable design simplifies installation and accurate clearance adjustment.

Bearing - 22232 CC/W33 SKF

SKF spherical roller bearing with cylindrical bore and W33 lubrication groove 160 × 290 × 80 mm. Steel / standard cage, W33, Cn, no seal.

Bearing - 30309 A ZVL

45 × 100 × 27.25 mm. is a single-row tapered roller bearing for combined radial and axial loads. Its separable design simplifies mounting and precise adjustment of clearance or preload.

Bearing - 6204 2RS SKF

20 × 47 × 14 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; compare the complete designation before ordering.

Bearing - RNA4824 IKO

130 × 150 × 30 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - SD 52 DIN 472 NEREZ NEU

Bearing.

Bearing - 61804 2RS KINEX

20 × 32 × 7 mm. bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against KINEX documentation and the requirements of the specific application.

Bearing - 6203 2Z C3 SKF

17 × 40 × 12 mm. Metal shields on both sides. Greater radial internal clearance. Single-row deep groove ball bearing with non-contact steel shields on both sides and C3 radial internal clearance. Suitable for high-speed applications and arrangements where fits, temperature or load reduce the bearing's operating clearance.

Bearing - Z-562497.TR1 FAG

Bearing - is a single-row tapered roller bearing with conical rollers and raceways. Its open design accommodates combined loads, high radial loads and axial forces in one direction. The bearing consists of a cup and a cone and is easy to assemble and disassemble. For operation it is mounted in mirror-image arrangement with a second tapered roller bearing; X, O or tandem….