Bearing - 6208 2RS KINEX
Related products
30x72x19 mm
Single-row 6306 2RS TIMKEN deep-groove ball bearing
Rubber seals on both sides; compare the complete designation before ordering.
17x35x10 mm
Single-row ZKL 6003-RS deep groove ball bearing with a rubber seal on one side. The sealed side helps protect the lubricant, while the opposite side remains open for the lubrication method defined by the bearing arrangement.
INA KSO20-PP is an open self-aligning linear ball bearing designed for precise and smooth linear motion on a supported guide shaft with a diameter of 20 mm. The PP version is fitted with lip seals on both sides to help protect the internal components against contamination and retain lubricant.
Dimensions: 20 × 32 × 45 mm.
20x52x15 mm
SKF 6304 2RS C3 single-row deep-groove ball bearing with rubber seals on both sides.
C3 denotes greater-than-normal radial internal clearance; for radial and limited axial loads in either direction.
25x52x16.25 mm
KBS single-row tapered roller bearing for combined radial and axial load in one direction.
17x40x12 mm
NSK 6203 2RS single-row deep-groove ball bearing with contact rubber seals on both sides. The closed design helps retain lubricant and protects the raceways from contamination and moisture.
30x62x35.7 mm
FAG 16206 S-type bearing insert for mounting a 30 mm shaft in a suitable bearing housing. The extended inner ring with two locking screws provides straightforward and reliable shaft location.
7x22x7 mm
Rubber seals on both sides. Compact INA single-row deep groove ball bearing for protected rotating assemblies.
10x30x9 mm
SKF 6200 2RS single-row deep-groove ball bearing with rubber seals on both sides.
For radial loads and limited axial loads in either direction.
25x62x17 mm
ZKL 6305 single-row deep-groove ball bearing in an open design.
For radial loads and limited axial loads in either direction.
50x90x20 mm
ZKL 6210 single-row deep-groove ball bearing in an open design, with no sealing or clearance suffix shown in the designation.
35x72x23 mm
ZKL NU 2207 single-row cylindrical roller bearing for high radial loads. The NU design has two integral flanges on the outer ring and permits axial displacement of the shaft relative to the housing in both directions, making it suitable for a non-locating bearing position.
12x28x8 mm
URB 6001 single-row open deep groove ball bearing for radial and axial loads in both directions. Dynamic load rating 5.1 kN, mass 0.022 kg.
45x100x25 mm
KINEX 6309 2RS single-row deep-groove ball bearing with rubber seals on both sides.
For radial loads and limited axial loads in either direction.
25x62x17 mm
TIMKEN 6305 2RS single-row deep-groove ball bearing with contact rubber seals on both sides. The closed design helps retain lubricant and protects the raceways from contamination and moisture.
30x49.25x13.6 mm
ZKL PLC 23-5 special clutch ball bearing with a pressed-steel housing and steel cage. Intended for the later clutch design used on Škoda 105–130 vehicles; always confirm compatibility by designation and dimensions.
Metal shields on both sides
Greater radial internal clearance
35x72x17 mm
Single-row open ZKL 6207 deep groove ball bearing for radial loads and axial loads in both directions. The open design allows the lubrication method to be selected for the specific bearing arrangement.
5x13x4 mm
Miniature single-row IBB 695 2Z deep groove ball bearing with non-contact sheet-steel shields on both sides. A compact design for small mechanisms requiring low friction and protection of the lubricant from ordinary contaminants.
Large radial internal clearance
25x47x12 mm
ZVL single-row deep groove ball bearing with rubber seals on both sides (2RS).
55x78x16 mm
ZKL 51111 A single-direction thrust ball bearing for carrying axial load in one direction. Its separable design simplifies mounting and inspection of the individual components.
25x52x15 mm
SKF single-row deep groove ball bearing with contact seals on both sides (2RS1).
25x62x17 mm
Single-row SKF Explorer 6305-2Z/C3GJN deep groove ball bearing with non-contact sheet-steel shields on both sides and C3 radial internal clearance. The grease-lubricated design is suitable for high rotational speeds.
25x47x15 mm
ZVL 32005 AX single-row tapered roller bearing for combined radial and one-direction axial loads; the separable design requires correct clearance or preload adjustment.
60x130x46 mm
ZKL 22312 KW33J double-row spherical roller bearing with a 1:12 tapered bore, W33 lubrication groove and three holes, and a J steel cage. The self-aligning design carries high radial loads together with axial loads in both directions.
15x32x9 mm
Single-row SKF 6002-2RSH deep groove ball bearing in SKF Explorer performance class. NBR contact seals on both sides help retain the grease and protect the bearing against contamination.
25x52x15 mm
SKF 6205 2Z/C3 single-row deep-groove ball bearing with metal shields on both sides.
C3 denotes greater-than-normal radial internal clearance; for radial and limited axial loads in either direction.
30x47x9 mm
Thin-section, single-row NTN 6906 2RS deep groove ball bearing with contact rubber seals on both sides, CN clearance and a pressed-steel cage. The compact design is intended for sealed arrangements with limited radial space.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any KINEX product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
KINEX – product identification and supply
The KINEX designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.