Bearing - 6312 2ZR KINEX
Bearing - 1309 EKTN9 C3 SKF
45 × 100 × 25 mm. ball bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against SKF documentation and the requirements of the specific application.
Bearing - 623 2Z ZKL
3 × 10 × 4 mm. Single-row deep-groove ball bearing. Metal shields on both sides; compare the complete designation, including suffixes.
Bearing - 624 P5 TPX ZKL
4 × 13 × 5 mm. bearing with increased P5 precision. Catalogue brand: TPX; compare the complete designation and physical marking before replacement.
Bearing - 6207 ZKL
35 × 72 × 17 mm. Single-row open deep groove ball bearing for radial loads and axial loads in both directions. The open design allows the lubrication method to be selected for the specific bearing arrangement.
Bearing - 6303 2Z KINEX
17 × 47 × 14 mm. bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against KINEX documentation and the requirements of the specific application.
Bearing - 203 KRR AH02 CRAFT
ball bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against CRAFT documentation and the requirements of the specific application. 16.2 × 40 × 18.3 mm.
Bearing - 6208 2Z ZKL
40 × 80 × 18 mm. Metal shields on both sides single-row deep-groove ball bearing with a steel cage and non-contact shielding. Low friction and shields on both sides help retain the lubricant inside the bearing.
Bearing - SX12T01T9X/58.928CS33 PTI
Bearing.
Bearing - 61805 2RS SKF
25 × 37 × 7 mm. Single-row deep groove ball bearing with compact dimensions; the corresponding SKF catalogue designation is 61805-2RS1. Contact seals on both sides help retain the grease and protect the bearing against contamination.
Bearing - 6213 2Z C3 FAG
65 × 120 × 23 mm. Bearing with sheet-metal shields on both sides and increased radial internal clearance.
Bearing - 6001 2Z SKF
12 × 28 × 8 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. It combines low friction and lubricant retention with the ability to carry radial and moderate axial loads in both directions.
Needle roller bearing - HK 5024 2RS A L271 INA
50 × 58 × 24 mm. INA needle roller bearing HK 5024 2RS A L271 for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part. Confirm compatibility using manufacturer documentation and the requirements of the specific application.
Bearing - NU 2207 ZKL
35 × 72 × 23 mm. single-row cylindrical roller bearing for high radial loads. The NU design has two integral flanges on the outer ring and permits axial displacement of the shaft relative to the housing in both directions, making it suitable for a non-locating bearing position.
Needle roller bearing - HK 1412 NTN
14 × 20 × 12 mm. NTN needle roller bearing HK 1412 for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part. Confirm compatibility using manufacturer documentation and the requirements of the specific application.
Spherical plain bearing - GAL 35 UK 2RS ELGES
with rubber seals on both sides spherical plain bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against ELGES documentation and the requirements of the specific application.
Bearing - 624 2RS EU-ROLL
4 × 13 × 5 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; compare the complete designation before ordering.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any KINEX product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
KINEX – product identification and supply
The KINEX designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.