Bearing - 7007 CD PA9ADBC SKF

NU 2205 URB single-row cylindrical roller bearing is a separable bearing for high radial loads. The NU design has two integral flanges on the outer ring and a flangeless inner ring, allowing axial displacement of the shaft relative to the housing in both directions.

6313 MP63 ZKL deep-groove ball bearing is an open single-row bearing with a solid brass or bronze cage (M), P6 accuracy and greater-than-normal C3 radial clearance (P63). It carries radial loads and axial loads in both directions.

Self-aligning ball bearing 2306 E 2RS1TN9 SKF has two rows of balls and a common spherical raceway in the outer ring. This design accommodates static and dynamic misalignment between the shaft and housing.

Seals on both sides help protect the bearing interior from contaminants. It is suitable for arrangements where shaft deflection or mounting misalignment can occur.

50x110x27 mm

The 6310 C 2HRS C3 FAG deep-groove ball bearing is a Generation C single-row bearing with contact seals on both sides and C3 radial internal clearance. It is grease-filled and normally requires no relubrication under suitable operating conditions.

Suitable for motors, pumps, fans, gearboxes and industrial drives requiring contamination protection and additional internal clearance for temperature or tight fits.

6213 C3 ZVL deep-groove ball bearing is an open single-row bearing with greater-than-normal C3 radial internal clearance. It carries radial loads and moderate axial loads in both directions and suits arrangements where interference fits or operating temperatures reduce internal clearance.

SS 6203 2RS neu stainless-steel deep-groove ball bearing is a single-row bearing with rubber seals on both sides. The stainless execution improves resistance to moisture and corrosion, while the seals protect the factory grease and bearing interior.

61903 2RS1 SKF deep-groove ball bearing is a single-row bearing with contact rubber seals on both sides. It carries radial loads and moderate axial loads in both directions, while the factory grease is protected against leakage and common contaminants.

50x90x20 mm

The 6210 N KINEX deep-groove ball bearing is a single-row radial bearing with a snap-ring groove in the outer ring. The groove simplifies axial location in the housing, while the deep raceways support radial loads and moderate axial forces in both directions.

This open, unsealed design is suitable for gearboxes, electric motors and industrial positions with a separate lubrication system.

NA 4906 V DKF needle roller bearing is a full-complement radial bearing with machined outer and inner rings. The high number of needles provides high radial load capacity in a small radial cross-section; the design is intended for carefully lubricated arrangements at moderate speeds.

HK 3520 CX drawn-cup needle roller bearing is an open-ended, thin-walled bearing without an inner ring. It provides high radial load capacity in a very small radial space; a suitably hardened and precision-ground shaft forms the inner raceway.