Bearing - S 623 2Z GPRJ GRW
Double-row tapered roller bearing assembly TIMKEN 05062/05185D. d = 15.875 mm; D = 47 mm; T = 31.747 mm; C = 25.212 mm.
Double-row tapered roller bearing assembly TIMKEN 05075-90020. d = 19.05 mm; T = 31.75 mm.
Double-row tapered roller bearing assembly TIMKEN 07079-90100. Dimensions of this variant: unconfirmed.
Bearing - 6004 2RS ZVL
20 × 42 × 12 mm. Single-row deep-groove ball bearing with rubber seals on both sides. Check the complete designation and suitability for the specific application.
Bearing - YAT 205 SKF
25 × 52 × 27.2 mm. insert ball bearing with a narrow inner ring extended on one side and locking by two set screws. Standard contact seals on both sides protect the grease and bearing interior.
Bearing - 61901 2RS ZVL
12 × 24 × 6 mm. Rubber seals on both sides.
Double-row tapered roller bearing assembly TIMKEN 08125-90059. Dimensions of this variant: unconfirmed.
Single-row tapered roller bearing TIMKEN 05062/05185. d = 15.875 mm; D = 47 mm; T = 14.381 mm.
Bearing - 6000 2RS ZVL
10 × 26 × 8 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.
Precision bearings NSK 100BER10HTE34DD. Dimensions of this variant: unconfirmed.
Bearing - 608 2Z NMB
8 × 22 × 7 mm. Single-row deep-groove ball bearing. Metal shields on both sides; compare the complete designation before ordering.
Bearing - SD 52 DIN 472 NEREZ NEU
Bearing.
Single-row tapered roller bearing TIMKEN 03062/03157X. d = 15.875 mm; D = 40 mm; T = 14.29 mm.
Double-row tapered roller bearing assembly TIMKEN 02876-902A1. d = 31.75 mm; D = 76.2 mm.
Bearing - 607 2RSH SKF
7 × 19 × 6 mm. Contact seals of synthetic rubber (NBR) on both sides.
Single-row tapered roller bearing TIMKEN 07093/07196. d = 23.813 mm; D = 50.005 mm; T = 13.495 mm.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any GRW product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
GRW – product identification and supply
The GRW designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.