Bearing - YET 208 SKF

35x72x23 mm

Double-row self-aligning ball bearing 2207 ZKL with a cylindrical bore. The spherical outer-ring raceway accommodates angular misalignment; suitable primarily for radial load and limited axial load in both directions.

60x110x22 mm
Higher accuracy class P6

Single-row angular-contact ball bearing 7212 P6 ZKL for combined radial load and axial load in one direction. P6 accuracy is suitable for arrangements with higher requirements for dimensional and running accuracy.

Cylindrical roller bearing NU 2210 ZKL is a single-row radial bearing with high load capacity. The NU design has two integral flanges on the outer ring and an inner ring without flanges.

It permits axial displacement of the shaft relative to the housing in both directions and is therefore primarily used as a non-locating bearing. It does not provide axial shaft location.

14x22x20 mm

Needle roller bearing without inner ring NK 14/20-XL INA for high radial loads in a compact space. The 14 mm dimension is the under-roller diameter, not a conventional bore; a suitably prepared shaft surface forms the inner raceway.

6000 2RS1 SKF deep-groove ball bearing is a single-row bearing with rubber seals on both sides. It carries radial loads and moderate axial loads in both directions while protecting the factory grease against leakage and common contaminants.

90x160x40 mm

Spherical roller bearing 22218 CCKW33 SKF with a tapered bore and W33 relubrication features. It carries high radial loads and axial loads in both directions, while its self-aligning design accommodates misalignment.

12x28x11 mm

Single-direction thrust ball bearing 51201 URB for carrying axial load in one direction. Its separable design simplifies installation of the individual washers and ball-and-cage assembly; when replacing, compare the complete designation, dimensions and load direction.

50x90x20 mm
Rubber seals on both sides

Single-row deep-groove ball bearing 6210 2RSR ZVL for radial load and moderate axial loads in both directions. Contact rubber seals on both sides retain lubricant and protect the rolling elements from dust, contaminants and splashing moisture.

30x55x13 mm

Single-row deep groove ball bearing 6006 2Z FAG with non-contact metal shields on both sides. Low-friction design for radial and axial loads in both directions; compare the complete 2Z marking before replacement.

17x40x12 mm
Metal shields on both sides
Greater radial internal clearance

Single-row deep groove ball bearing 6203 2Z C3 SKF with non-contact steel shields on both sides and C3 radial internal clearance. Suitable for high-speed applications and arrangements where fits, temperature or load reduce the bearing's operating clearance.