NCF3026V

Bearing - NU 2205 KINEX

25 × 52 × 18 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - B7006 E 2RSD T P4S UM FAG

30 × 55 × 13 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 6215 2RS ZVL

75 × 130 × 25 mm. Bearing with rubber seals on both sides for use in machinery and equipment.

Bearing - NU 224 E XL M1 FAG

120 × 215 × 40 mm. FAG bearing with the complete designation. When selecting a replacement, compare the full designation, dimensions and design required for the application.

Bearing - 6216 2RS1 C3 SKF

80 × 140 × 26 mm. Rolling bearing for use in machinery and equipment.

Bearing - 6005 2RS SKF

25 × 47 × 12 mm. deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.

Bearing - 6307 ZKL

35 × 80 × 21 mm. single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.

Bearing - 6202 2RS FBJ JAPAN

15 × 35 × 11 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; compare the complete designation before ordering.

Bearing - 6906 2RS EZO

30 × 47 × 9 mm. Thin-section, single-row deep groove ball bearing with contact rubber seals on both sides. The CN-clearance design with a steel cage combines compact dimensions with protection of the lubricant from ordinary contaminants.

Bearing - 6006 2RS ZVL

30 × 55 × 13 mm. Single-row deep-groove ball bearing with rubber seals on both sides. Check the complete designation and suitability for the specific application.