NJ1036MAC3

Bearing - 6301 2Z ZKL

12 × 37 × 12 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. Dynamic load rating 9.8 kN, mass 0.06 kg.

Bearing - NJ 2311 M SRO

55 × 120 × 43 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 6006 2RS ZVL

30 × 55 × 13 mm. Single-row deep-groove ball bearing with rubber seals on both sides. Check the complete designation and suitability for the specific application.

Bearing - 626 2Z GPZ

6 × 19 × 6 mm. Single-row deep-groove ball bearing. Metal shields on both sides; compare the complete designation, including suffixes.

Bearing - 7320 BECMB SKF

100 × 215 × 47 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - NU1040-XL-M1 FAG

Bearing - is a single-row cylindrical roller bearing in NU design with a solid brass M1 cage, cylindrical bore, no seals and normal. Cn clearance. It is an X-Life bearing. Dimensions: inner diameter d 200 mm, outer diameter D 310 mm, width B 51 mm; weight 14.6 kg. NU bearings carry radial forces and allow axial displacement in both directions, making them suitable as floating….

Bearing - 309726 DA (VKBC 20012) SKF

34 × 64 × 37 mm. SKF 309726 DA compact double-row angular contact ball bearing, also listed under reference designation VKBC 20012. Intended for hub arrangements carrying combined radial and axial loads in both directions.

Bearing - 3206 ZKL

30 × 62 × 23 mm. double-row angular contact ball bearing for combined radial and axial loads in both directions. Its compact design provides rigid and accurate shaft guidance.

Bearing - 6202 2RS FBJ JAPAN

15 × 35 × 11 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; compare the complete designation before ordering.

Bearing - 6202 ZKL

15 × 35 × 11 mm. single-row deep groove ball bearing in open design. A compact bearing for radial and moderate axial loads in both directions, intended for arrangements providing their own lubrication and protection.

Bearing - NU 2205 KINEX

25 × 52 × 18 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 30204 A KLF

20 × 47 × 15.25 mm. single-row tapered roller bearing for combined radial and axial loads acting in one direction. Its separable design simplifies installation and accurate clearance adjustment.