NKS115

Bearing - 6005 2RS SKF

25 × 47 × 12 mm. deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.

Bearing - NU 2205 KINEX

25 × 52 × 18 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 6215 2RS ZVL

75 × 130 × 25 mm. Bearing with rubber seals on both sides for use in machinery and equipment.

Bearing - 624 P5 TPX ZKL

4 × 13 × 5 mm. bearing with increased P5 precision. Catalogue brand: TPX; compare the complete designation and physical marking before replacement.

Bearing - 6202 ZKL

15 × 35 × 11 mm. single-row deep groove ball bearing in open design. A compact bearing for radial and moderate axial loads in both directions, intended for arrangements providing their own lubrication and protection.

Bearing - 626 2Z GPZ

6 × 19 × 6 mm. Single-row deep-groove ball bearing. Metal shields on both sides; compare the complete designation, including suffixes.

Bearing - 6306 Z ZKL

30 × 72 × 19 mm. Single-row deep groove ball bearing with a non-contact metal shield on one side. It carries radial and limited axial loads in both directions; the opposite side remains open.

Bearing - 6906 2RS EZO

30 × 47 × 9 mm. Thin-section, single-row deep groove ball bearing with contact rubber seals on both sides. The CN-clearance design with a steel cage combines compact dimensions with protection of the lubricant from ordinary contaminants.

Bearing - 624 ZKL

4 × 13 × 5 mm. single-row deep groove ball bearing in an open design. Deep raceways carry radial and moderate axial loads in both directions with low friction.