Bearings, Page 2
Product sorting
List of products
Needle roller bearing - HK 2012 CX
20 × 26 × 12 mm. needle roller bearing for replacement use. Dimensions d × D × B: 20 × 26 × 12 mm. Before ordering, compare the complete designation, dimensions and design with the original part.
Bearing - 61803 2RS MTM
17 × 26 × 5 mm. Rubber seals on both sides. Thin-section ball bearing for compact arrangements carrying radial and axial loads in both directions. Rubber seals on both sides protect the grease from dust and moisture; when replacing, retain the complete 2RS designation.
Bearing - 6000 2RSH C3 SKF
10 × 26 × 8 mm. deep groove ball bearing has contact rubber seals on both sides and greater-than-normal C3 radial internal clearance. The seals protect lubricant and raceways, while C3 provides allowance for clearance reduction caused by fits or operating temperature.
Bearing - 629 DKF
9 × 26 × 8 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 629 2RSH SKF
9 × 26 × 8 mm. Contact seals of synthetic rubber (NBR) on both sides.
Bearing - 51200 DPI
10 × 26 × 11 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
Bearing - HK 2018 RS IBU
20 × 26 × 18 mm. Rubber seal on one side.
Bearing - SS6000 2RS MTM
10 × 26 × 8 mm. Rubber seals on both sides.
Needle roller bearing - HK 2016 IBB
20 × 26 × 16 mm. needle roller bearing for replacement use. Dimensions d × D × B: 20 × 26 × 16 mm. Before ordering, compare the complete designation, dimensions and design with the original part.
Bearing - 629 2Z NEU
9 × 26 × 8 mm. Metal shields on both sides.
Needle roller bearing - HK 2020 SKF
20 × 26 × 20 mm. needle roller bearing for replacement use. Dimensions d × D × B: 20 × 26 × 20 mm. Before ordering, compare the complete designation, dimensions and design with the original part.
Needle roller bearing - HK 2016 SKF
HK2016 SKF needle roller and cage assembly without seal, 20 × 26 × 16 mm, weight 0.019 kg.
Bearing - 629 2RS CX
9 × 26 × 8 mm. Rubber seals on both sides.
Bearing - NKX 17 ZB INA
needle roller bearing for precise radial-load applications with limited installation space.
Bearing - 6000 C3 FAG
10 × 26 × 8 mm. Greater radial internal clearance.
Bearing - 51200 SKF
10 × 26 × 11 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
Bearing - 51101 FAG
12 × 26 × 9 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
Bearing - 6000 SKF
10 × 26 × 8 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.