Bearings, Page 2
Product sorting
List of products
20x35x10 mm
ZKL 51104 P5 thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
17x35x10 mm
6003 2Z ZVL is a single-row deep-groove ball bearing with two non-contact metal shields. Its versatile design supports radial load and moderate axial loads in both directions, while low friction makes it suitable for higher speeds.
The shields help retain lubricant and limit the entry of larger contaminants. This is a general-purpose machine bearing, not a contact-sealed or watertight design.
8x12x10 mm
HK 0810 SKF is a drawn-cup needle roller bearing with open ends. Its compact cross-section provides high radial load carrying capacity and stiffness; it is not intended to support axial load.
The bearing has no separate inner ring, so a suitably hardened and ground shaft surface normally forms the raceway. Correct shaft quality, housing fit and lubrication are essential for service life.
17x35x10 mm
6003 2RSH SKF single-row deep-groove ball bearing with high-performance contact seals on both sides for reliable protection of the lubricant and bearing interior.
17x35x10 mm
6003 2Z ZKL single-row deep-groove ball bearing with metal shields on both sides for lubricant protection and low friction.
17x35x10 mm
6003 2RS FAG deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.
12x22x10 mm
The GE 12 E BBC radial spherical plain bearing is a compact sliding bearing with spherical sliding surfaces. It accommodates tilting, slow oscillating movement and misalignment under radial and combined loads.
This open, unsealed design is suitable for linkages, small hydraulic mechanisms and machine joints with regular lubrication and external contamination protection.
HK 1210 B INA drawn-cup needle roller bearing is an open-ended, thin-walled bearing without an inner ring. It provides high radial load capacity in a very small radial space; a suitably hardened and precision-ground shaft forms the inner raceway.
12x32x10 mm
6201 FAG single-row deep groove ball bearing in an open design is a versatile choice for radial loads and moderate axial loads in both directions. It offers low friction and smooth running.
20x35x10 mm
FAG 51104 thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
17x35x10 mm
Single-row deep groove ball bearing, shielded on both sides (2Z).
20x35x10 mm
KINEX 51104 thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
17x35x10 mm
Single-row deep groove ball bearing, sealed on both sides (2RS).
Rubber seals on both sides
45x75x10 mm
SKF rolling bearing for industrial bearing arrangements. Before selection, verify the complete designation, dimensions and operating parameters in the manufacturer documentation.
12x32x10 mm
SS 6201 2RS neu bearing for industrial rotating applications. Before ordering, compare the complete designation, dimensions and design with the manufacturer documentation.
12x16x10 mm
SKF needle roller bearing for radial arrangements in compact assemblies. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
Greater radial internal clearance