Bearings, Page 21

Bearing - 6003 2Z ZVL

17 × 35 × 10 mm. is a single-row deep-groove ball bearing with two non-contact metal shields. Its versatile design supports radial load and moderate axial loads in both directions, while low friction makes it suitable for higher speeds. The shields help retain lubricant and limit the entry of larger contaminants. This is a general-purpose machine bearing, not a contact-sealed or watertight design.

Bearing - 626 ZR ZKL

6 × 19 × 6 mm. is a single-row deep-groove ball bearing with one non-contact metal shield. Its versatile design supports radial load and moderate axial loads in both directions, while low friction makes it suitable for higher speeds. The shields help retain lubricant and limit the entry of larger contaminants. This is a general-purpose machine bearing, not a contact-sealed or watertight design.

Bearing - 6205 2RS DPI

25 × 52 × 15 mm. is a single-row deep-groove ball bearing with contact seals on both sides. The seals help retain lubricant and protect the rolling space from dust, moisture and other common contaminants. Its versatile design supports radial load and moderate axial loads in both directions. It is well suited to applications where dependable bearing protection and low maintenance requirements are important.

Bearing - 626 ZKL

6 × 19 × 6 mm. is an open, single-row deep-groove ball bearing. It supports radial load and moderate axial loads in both directions, while its low-friction design makes it suitable for higher speeds. The open design has no shields or seals, allowing easy lubricant access and effective heat dissipation. It therefore requires a clean arrangement with suitable lubrication or external sealing.

Bearing - 635 2RS GMN

5 × 19 × 6 mm. is a single-row deep-groove ball bearing with contact seals on both sides. The seals help retain lubricant and protect the rolling space from dust, moisture and other common contaminants. Its compact design supports radial load and moderate axial loads in both directions. It is well suited to small rotating mechanisms where dependable bearing protection and low maintenance requirements are….

Bearing - 6000 Z C6 ZKL

10 × 26 × 8 mm. is a single-row deep-groove ball bearing with one non-contact metal shield; the opposite side remains open. The design supports radial load and moderate axial loads in both directions while maintaining low friction. The shield helps retain lubricant and limits the entry of larger contaminants from one side. C6 is part of the complete designation and must be checked against the original….

Bearing - 6300 ZKL

10 × 35 × 11 mm. is an open, single-row deep-groove ball bearing. It supports radial load and moderate axial loads in both directions, while its low-friction design makes it suitable for higher speeds. The open design has no shields or seals, allowing easy lubricant access and effective heat dissipation. It therefore requires a clean arrangement with suitable lubrication or external sealing.

Bearing - 625 ZR ZKL

5 × 16 × 5 mm. is a single-row deep-groove ball bearing with one non-contact metal shield; the opposite side remains open. The design supports radial load and moderate axial loads in both directions while maintaining low friction. The shield helps retain lubricant and limits the entry of larger contaminants from one side, while the open side allows lubricant access and improved heat dissipation.

Bearing - EL 5 SKF

5 × 16 × 5 mm. is a miniature single-row deep-groove ball bearing dimensionally corresponding to the 625 series. Its deep raceway design supports radial load and moderate axial loads in both directions. The EL 5 designation shown does not specify shielding, sealing or internal clearance. Check the physical design and complete marking of the original bearing before selecting a replacement.

Bearing - 30303 MGK

17 × 47 × 15.25 mm. tapered roller bearing is a single-row, separable bearing for combined radial and axial loads. Its tapered raceways carry axial load in one direction; bearings are normally paired where axial load must be supported in both directions.

Bearing - 6202 2RS SS CX

15 × 35 × 11 mm. is a stainless-steel single-row deep-groove ball bearing with contact seals on both sides. The seals help retain lubricant and protect the rolling space from dust, moisture and common contaminants. The stainless-steel design provides improved corrosion resistance compared with standard bearing steel. Suitability for a specific chemical environment, temperature or water exposure must be….

Needle roller bearing - HK 0810 SKF

8 × 12 × 10 mm. is a drawn-cup needle roller bearing with open ends. Its compact cross-section provides high radial load carrying capacity and stiffness; it is not intended to support axial load. The bearing has no separate inner ring, so a suitably hardened and ground shaft surface normally forms the raceway. Correct shaft quality, housing fit and lubrication are essential for service life.

Bearing - 6222 ZKL

110 × 200 × 38 mm. single-row deep-groove ball bearing in an open design for robust industrial arrangements with direct lubrication access.

Bearing - 6204 2Z CX

20 × 47 × 14 mm. single-row deep-groove ball bearing with non-contact metal shields on both sides for lubricant protection and low friction.