Bearings, Page 22

Bearing - 61905 2RS1 SKF

25 × 42 × 9 mm. Rubber seals on both sides.

Bearing - 2308 MGM

40 × 90 × 33 mm. double-row self-aligning ball bearing with a spherical outer-ring raceway to accommodate misalignment and shaft deflection.

Bearing - 63/22 2RS KOYO

22 × 56 × 16 mm. deep-groove ball bearing is a single-row bearing with contact rubber seals on both sides. It carries radial loads and moderate axial loads in both directions, while the factory grease is protected against leakage and common contaminants.

Bearing - 6902 2RS DPI

15 × 28 × 7 mm. thin-section deep-groove ball bearing with rubber seals on both sides for compact arrangements and protection of the lubricant from contamination.

Bearing - 6203 2Z SKF

17 × 40 × 12 mm. Metal shields on both sides.

Bearing - 32211 A ZKL

55 × 100 × 26,75 mm. single-row tapered roller bearing for high combined radial and one-direction axial loads.

Bearing - 686 2Z -618/6- CX

6 × 13 × 5 mm. 686 2Z (618/6) CX miniature deep-groove ball bearing with non-contact metal shields on both sides for low friction and lubricant protection.

Bearing - 6003 2RSH SKF

17 × 35 × 10 mm. single-row deep-groove ball bearing with high-performance contact seals on both sides for reliable protection of the lubricant and bearing interior.

Bearing - SS 6203 2RS neu

17 × 40 × 12 mm. stainless-steel deep-groove ball bearing is a single-row bearing with rubber seals on both sides. The stainless execution improves resistance to moisture and corrosion, while the seals protect the factory grease and bearing interior.

Bearing - 3309 BD XL 2HRS TVH FAG

45 × 100 × 39 mm. double-row angular contact ball bearing in X-life performance design, sealed on both sides and fitted with a plastic cage.

Bearing - 3206 C2 ZKL

30 × 62 × 23.8 mm. double-row angular contact ball bearing in an open design with reduced C2 internal clearance for combined loading.

Bearing - 30304 A ZKL

20 × 52 × 16.25 mm. single-row tapered roller bearing for high combined radial and one-direction axial loads.

Bearing - NJ 2212 E ZVL

60 × 110 × 28 mm. single-row cylindrical roller bearing with high radial load capacity, separable construction and axial guidance in one direction.

Bearing - 6003 2Z ZKL

17 × 35 × 10 mm. single-row deep-groove ball bearing with metal shields on both sides for lubricant protection and low friction.