Bearing - 6002 2RS TIMKEN
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryProduct detailed description
Bearing - 6002 2RS TIMKEN
6002 2RS TIMKEN sealed deep-groove ball bearing
6002 2RS TIMKEN is a single-row deep-groove ball bearing with contact seals on both sides. The 2RS design improves protection of the lubricant and rolling space in dusty or damp environments.
Key features
- dimensions: 15 × 32 × 9 mm,
- 2RS contact seals on both sides,
- suitable for radial load and moderate axial loads in both directions,
- good protection from dust, moisture and common contaminants,
- helps retain and protect the lubricant inside the bearing.
Typical applications
Typical uses include electric motors, pumps, gearboxes, fans, conveyors and other industrial equipment requiring compact dimensions and a sealed bearing design.
Mounting guidance
Apply mounting force only through the ring being fitted and avoid damaging the sealing lips. Check the cleanliness of seating surfaces, the required shaft and housing fits, and the operating conditions. Contact seals provide more protection than metal shields, but they are not a pressure seal or a solution for permanent immersion.
Replacement check: compare the complete designation 6002 2RS TIMKEN, the dimensions 15 × 32 × 9 mm and the two-sided sealed design with the bearing being replaced.
Additional parameters
| Category: | Single row ball bearingsBearings 15 × 32 × 9 mm |
|---|---|
| Weight: | 0.03 kg |
| EAN: | 087796292390 |
| Inner diameter d (mm): | 15 |
| Outer diameter D (mm): | 32 |
| Width (mm): | 9 |
Product rating
Be the first who will post an article to this item!
Choose TIMKEN bearings by the complete designation and the components required. Distinguish a complete bearing from a separately supplied component before requesting a quotation.
Specify the complete bearing arrangement
For a tapered roller bearing, include the cone and cup references where specified. For other bearing designs, preserve the complete marking and suffixes. Add the required quantity and dimensions of the original part.
Is one ring reference enough for a complete set?
Check the supplied components against the original specification. A reference may identify only one component, so a complete set must not be assumed. Send photographs of both ring markings if the information is incomplete.
Request a TIMKEN quotation · Select bearings by designation or size
Availability and any replacement will be confirmed for the specific item.
| Manufacturing company : | Timken Europe |
|---|---|
| Address : | 2 Rue Timken, 68002 Colmar Cedex, France |