Bearing - 6306 2RS TIMKEN
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryProduct detailed description
Bearing - 6306 2RS TIMKEN
6306 2RS TIMKEN is a single-row deep groove ball bearing with dimensions of 30 × 72 × 19 mm. The 2RS suffix denotes contact rubber seals on both sides, helping to retain lubricant and protect the rolling elements from external contamination.
Key features
- Designation: 6306 2RS TIMKEN
- Manufacturer: TIMKEN
- Dimensions: 30 × 72 × 19 mm (bore × outside diameter × width)
- Design: single-row deep groove ball bearing
- Sealing: contact rubber seals on both sides (2RS)
- Loads: radial and moderate axial loads in both directions
Applications and benefits
The bearing is suitable for electric motors, fans, small gear units, rollers and other machinery where protection from contamination is important. The double-sided sealing limits lubricant loss and reduces relubrication requirements in normal service.
Installation guidance
Check that the seats are clean and aligned. Apply mounting force through the ring with the interference fit and protect the seals from damage. Confirm suitability for the application speed, temperature, load and environment.
Additional parameters
| Category: | Single row ball bearingsBearings 30 × 72 × 19 mm |
|---|---|
| Weight: | 0.35 kg |
| EAN: | 087796293922 |
| Inner diameter d (mm): | 30 |
| Outer diameter D (mm): | 72 |
| Width (mm): | 19 |
Product rating
Be the first who will post an article to this item!
Choose TIMKEN bearings by the complete designation and the components required. Distinguish a complete bearing from a separately supplied component before requesting a quotation.
Specify the complete bearing arrangement
For a tapered roller bearing, include the cone and cup references where specified. For other bearing designs, preserve the complete marking and suffixes. Add the required quantity and dimensions of the original part.
Is one ring reference enough for a complete set?
Check the supplied components against the original specification. A reference may identify only one component, so a complete set must not be assumed. Send photographs of both ring markings if the information is incomplete.
Request a TIMKEN quotation · Select bearings by designation or size
Availability and any replacement will be confirmed for the specific item.
| Manufacturing company : | Timken Europe |
|---|---|
| Address : | 2 Rue Timken, 68002 Colmar Cedex, France |