Bearing - 2200 E-2RS1TN9 SKF
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryProduct detailed description
Bearing - 2200 E-2RS1TN9 SKF
2200 E-2RS1TN9 SKF self-aligning ball bearing
This double-row SKF self-aligning ball bearing measures 10 × 30 × 14 mm and uses a common spherical raceway in the outer ring. The design accommodates shaft deflection as well as static and dynamic misalignment between the shaft and housing.
Key data
| Bore diameter d | 10 mm |
|---|---|
| Outside diameter D | 30 mm |
| Width B | 14 mm |
| Design | Seals on both sides |
Features and applications
- self-aligns without a significant increase in friction,
- supports radial loads and smaller axial loads in both directions,
- two-sided sealing helps retain lubricant and exclude contaminants,
- suitable for fans, conveyors, agricultural machinery and other arrangements affected by misalignment.
Installation guidance
Install in a clean environment and apply mounting force only to the ring with the interference fit. Do not damage the seals with tools or excessive heat. The self-aligning capability compensates for operating misalignment but does not replace correct alignment and secure mounting.
Replacement check: compare the complete designation 2200 E-2RS1TN9 SKF, dimensions, cylindrical bore and sealed design. Open versions or products with a different suffix may use a different cage, lubrication or operating specification.
Additional parameters
| Category: | Self-aligning ball bearingsBearings 10 × 30 × 14 mm |
|---|---|
| Weight: | 0.048 kg |
| EAN: | 7316570022735 |
| Inner diameter d (mm): | 10 |
| Outer diameter D (mm): | 30 |
| Width (mm): | 14 |
Product rating
Be the first who will post an article to this item!
Choose SKF bearings by the full designation and the requirements of the bearing arrangement. Preserve every suffix when searching for an exact item.
Check the details behind the designation
Compare bearing type, bore, outside diameter and width, followed by the specified clearance, sealing and precision. For a housing component or bushing, also identify the assembly and mounting.
What should a quotation request include?
Send the full designation, quantity and application. If the marking is incomplete, include dimensions and photographs of both sides. Availability and any replacement will be checked for the specific item.
Request a SKF quotation · Select bearings by designation or size
Availability and any replacement will be confirmed for the specific item.
| Manufacturing company : | AB SKF (publ) |
|---|---|
| Address : | Sven Wingquists Gata 2, SE-415 50 Göteborg, Sweden |
| E-mail : | skf.cz@skf.com |