Bearing - 2302 2RS CODEX
Unsure if the part fits? Send us the designation, dimensions or a photo.
Send an inquiryProduct detailed description
Bearing - 2302 2RS CODEX
2302 2RS CODEX is a sealed double-row self-aligning ball bearing with a cylindrical bore and dimensions of 15 × 42 × 17 mm. The spherical raceway in the outer ring lets the inner assembly accommodate angular misalignment between the shaft and housing without excessive edge loading.
Key features
- Self-aligning design: two rows of balls and a common spherical outer-ring raceway help compensate for shaft deflection and mounting errors.
- 2RS execution: rubber seals on both sides restrict the ingress of dust and moisture as well as lubricant leakage.
- Loads: designed primarily for radial loads, the bearing also carries moderate axial loads in both directions.
- Dimensions: 15 mm bore, 42 mm outside diameter and 17 mm width.
Installation and use
Do not wash the bearing or damage the seals, so the factory lubricant and internal protection remain intact. During mounting, apply fitting force only through the ring with the interference fit and never through the balls. Before ordering, compare the full designation 2302 2RS CODEX, dimensions and permissible misalignment with the original component and operating conditions.
Additional parameters
| Category: | Self-aligning ball bearingsBearings 15 × 42 × 17 mm |
|---|---|
| Weight: | 0.11 kg |
| Inner diameter d (mm): | 15 |
| Outer diameter D (mm): | 42 |
| Width (mm): | 17 |
Product rating
Be the first who will post an article to this item!
We can source almost any CODEX product, even if you cannot find it in our online shop.
Send us the product designation and quantity required. We will check the price, availability and delivery options.
Enquire about CODEX productsCODEX – Product range and selection
We can help identify the required version of a CODEX product from the complete designation and available documentation.
Examples from our catalogue
- 2302 2RS CODEX
- 6204 2RS SS CODEX
- 63003 2RS CODEX
What to include in your enquiry
- The full product designation, including all suffixes and specifications.
- The quantity required and, if relevant, when you need the part.
- Nameplate details, dimensions or a description of the application if the designation is unknown.
You can email a photo or drawing to info@Loziska-Policka.cz.
Your enquiry is non-binding. We will confirm the price, availability and delivery time for the specific product and discuss any alternative with you first.