3307A-2Z/C3MT33

Bearing - 6305 2Z C3 GJN SKF

25 × 62 × 17 mm. Single-row SKF Explorer 6305-2Z/C3GJN deep groove ball bearing with non-contact sheet-steel shields on both sides and C3 radial internal clearance. The grease-lubricated design is suitable for high rotational speeds.

Bearing - 6306 TB FAG

30 × 72 × 19 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 3208 ZKL

40 × 80 × 30 mm. double-row angular contact ball bearing for combined radial and axial loads in both directions. Its compact design provides rigid and accurate shaft guidance.

Bearing - 6322/C3 SKF

110 × 240 × 50 mm. Single-row deep groove ball bearing 6322 C3 SKF with increased radial internal clearance C3.

Bearing - 6216 2RS1 C3 SKF

80 × 140 × 26 mm. Rolling bearing for use in machinery and equipment.

Bearing - 6006 2RS ZVL

30 × 55 × 13 mm. Single-row deep-groove ball bearing with rubber seals on both sides. Check the complete designation and suitability for the specific application.

Bearing - 6304 2RS GS

20 × 52 × 15 mm. GS bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - 1209 MGM

45 × 85 × 19 mm. MGM bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - 6002 2RS FAG

15 × 32 × 9 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

Bearing - 6215 2RS ZVL

75 × 130 × 25 mm. Bearing with rubber seals on both sides for use in machinery and equipment.

Bearing - 6301 2Z ZKL

12 × 37 × 12 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. Dynamic load rating 9.8 kN, mass 0.06 kg.