Bearing - 3207 M HOFFMANN

Bearing - 22218 EW33J ZKL

90 × 160 × 40 mm. double-row spherical roller bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against ZKL documentation and the requirements of the specific application.

Bearing - 22209 E SKF

45 × 85 × 23 mm. Bearing for industrial rotating assemblies. Before selection, verify the complete designation, dimensions, and requirements of the specific application.

Spherical plain bearing - GAL 35 DO 2RS ELGES

with rubber seals on both sides spherical plain bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against ELGES documentation and the requirements of the specific application.

Bearing - 6207 ZKL

35 × 72 × 17 mm. Single-row open deep groove ball bearing for radial loads and axial loads in both directions. The open design allows the lubrication method to be selected for the specific bearing arrangement.

Bearing - 6203 2RS KINEX

17 × 40 × 12 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

Bearing - 608 Z ZKL

8 × 22 × 7 mm. Single-row deep-groove ball bearing with a non-contact metal shield on one side (Z). Check the complete designation and application suitability.

Bearing - 22310 W33J ZKL

50 × 110 × 40 mm. · ZKL bearing.

Bearing - PLC 23 5 ZKL

30 × 49.25 × 13.6 mm. ZKL PLC 23-5 special clutch ball bearing with a pressed-steel housing and steel cage. Intended for the later clutch design used on. Škoda 105–130 vehicles; always confirm compatibility by designation and dimensions.

Needle roller bearing - HK 3520 IBB

35 × 42 × 20 mm. IBB needle roller bearing HK 3520 for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part. Confirm compatibility using manufacturer documentation and the requirements of the specific application.

Bearing - 6201 C3 KINEX

12 × 32 × 10 mm. Greater radial internal clearance.

Bearing - 1726210 2RS1 SKF

bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against SKF documentation and the requirements of the specific application.

Linear ball bearing - KSO20-PP INA

is an open self-aligning linear ball bearing designed for precise and smooth linear motion on a supported guide shaft with a diameter of 20 mm. The PP version is fitted with lip seals on both sides to help protect the internal components against contamination and retain lubricant. INA bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design….