Bearing - 6200 2RS ZVL

Not rated Rating details

Brand: ZVL

€0,86 / pcs €0,71 excl. VAT

Delivery to:

Delivery options

Quantity discount

1 - 4 pcs

€0,86 / pcs

5 - 9 pcs = discount 3 %

€0,83 / pcs

10 - 24 pcs = discount 6 %

€0,81 / pcs

25 - 49 pcs = discount 9 %

€0,78 / pcs

50 and more pcs = discount 12 %

€0,76 / pcs

You save €0

Bearing - 6200 2RS ZVL

10 × 30 × 9 mm. is a single-row deep-groove ball bearing with contact rubber seals on both sides. It supports radial and limited axial loads while protecting the lubricant and raceways in commonly contaminated operation.

Detailed information

Expert advice

We help you choose the right type, size and version

Fast dispatch from stock

Stock items are dispatched without unnecessary waiting

Verified product specifications

Accurate designation, dimensions and technical data

We can source less common types

We help find special, older or hard-to-find versions

Product detailed description

Bearing - 6200 2RS ZVL

6200 2RS ZVL single-row deep-groove ball bearing

The 6200 2RS bearing from ZVL has deep raceways and a versatile design. It is intended primarily for radial loads and can also support limited axial loads in both directions.

Dimensions

Bore diameter d	10 mm
Outside diameter D	30 mm
Width B	9 mm

2RS design

contact rubber seals on both sides of the bearing,
effective protection of the lubricant and raceways against dust, moisture and common contaminants,
better sealing but more friction than an open or metal-shielded design,
suitable for electric motors, pumps, gearboxes, conveyors and other industrial positions.

Mounting guidance

The seals are not intended as a liquid-tight barrier against pressurized or continuous water exposure. Apply mounting force only through the ring with the interference fit, never through the balls or seals. For replacement, compare the complete 6200 2RS designation, radial clearance, operating speed and temperature.

Additional parameters

Category:	Bearings
Inner diameter d (mm):	10
Outer diameter D (mm):	30
Width B (mm):	9

Bearing - 3003 2RS C4 INA

In stock (122 pcs)

€84,03 excl. VAT

€101,68

Bearing - 3003 2RS C4 INA

17 × 35 × 14 mm. Rubber seals on both sides. Large radial internal clearance.

3003-2RS-C4 INA

Bearing - 608 2Z SKF

In stock (511 pcs)

€1,86 excl. VAT

€2,25

Bearing - 608 2Z SKF

8 × 22 × 7 mm. Single-row SKF bearing with non-contact metal shields on both sides (2Z) and normal radial clearance CN. Check the complete designation before ordering.

118

Bearing - 6203 2RS NSK

In stock (662 pcs)

€2,91 excl. VAT

€3,52

Bearing - 6203 2RS NSK

17 × 40 × 12 mm. single-row deep-groove ball bearing with contact rubber seals on both sides. The closed design helps retain lubricant and protects the raceways from contamination and moisture.

6203 2RS NSK

Needle roller bearing - HK 3520 MTM

In stock (2 pcs)

€1,65 excl. VAT

€2

Needle roller bearing - HK 3520 MTM

35 × 42 × 20 mm. MTM needle roller bearing HK 3520 for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part. Confirm compatibility using manufacturer documentation and the requirements of the specific application.

2405406

Needle roller bearing - HK 4020 INA

In stock (4 pcs)

€5,58 excl. VAT

€6,75

Needle roller bearing - HK 4020 INA

40 × 47 × 20 mm. INA needle roller bearing HK 4020 for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part. Confirm compatibility using manufacturer documentation and the requirements of the specific application.

HK 4020 INA

Bearing - 6003 RS ZKL

In stock (1 pcs)

€1,12 excl. VAT

€1,35

Bearing - 6003 RS ZKL

17 × 35 × 10 mm. Single-row ZKL 6003-RS deep groove ball bearing with a rubber seal on one side. The sealed side helps protect the lubricant, while the opposite side remains open for the lubrication method defined by the bearing arrangement.

6003 RS ZKL

Bearing - 6001 2Z SKF

In stock (5 pcs)

€2,02 excl. VAT

€2,45

Bearing - 6001 2Z SKF

12 × 28 × 8 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. It combines low friction and lubricant retention with the ability to carry radial and moderate axial loads in both directions.

6001 2Z SKF

Bearing - 16115 STEYR

€65,88 excl. VAT

€79,71

Bearing - 16115 STEYR

75 × 110 × 12 mm. Open single-row deep-groove ball bearing with a slim cross-section. The unshielded and unsealed design provides direct access for lubrication but requires a clean and suitably lubricated installation.

2402913

Bearing - 6213 2Z C3 FAG

In stock (2 pcs)

€34,16 excl. VAT

€41,33

Bearing - 6213 2Z C3 FAG

65 × 120 × 23 mm. Bearing with sheet-metal shields on both sides and increased radial internal clearance.

42389238

Bearing - 30204 A KLF

In stock (14 pcs)

€0,31 excl. VAT

€0,37

Bearing - 30204 A KLF

20 × 47 × 15.25 mm. single-row tapered roller bearing for combined radial and axial loads acting in one direction. Its separable design simplifies installation and accurate clearance adjustment.

130

Bearing - 6201 2ZR ZKL

€1,02 excl. VAT

€1,23

Bearing - 6201 2ZR ZKL

Bearing - is a single-row deep groove ball bearing with a cylindrical bore, standard steel cage and two metallic shields 2ZR. The shields adhere to the flat surface of the inner ring. Dimensions: inner diameter d 12 mm, outer diameter D 32 mm, width B 10 mm; weight 0.037 kg. The bearing has normal. Cn internal clearance, standard precision and standard lubrication. confirms no external….

6201 2ZR ZKL

Spherical plain bearing - GAL 35 DO 2RS ELGES

In stock (2 pcs)

€33,79 excl. VAT

€40,88

Spherical plain bearing - GAL 35 DO 2RS ELGES

with rubber seals on both sides spherical plain bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against ELGES documentation and the requirements of the specific application.

2438952

Show all alternative products

Product rating

Be the first who will post an article to this item!

Name

E-mail

Comment

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Discussion

Be the first who will post an article to this item!

Only registered users can submit posts. Please log in or sign up.

We can arrange delivery of almost any ZVL product, even if it is not currently listed in our catalogue.

Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.

ZVL – product identification and supply

The ZVL designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.

The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.

For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.

Manufacturing company :	ZVL SLOVAKIA, a.s.
Address :	Na stanicu 22, 010 09 Žilina, Slovakia
E-mail :	sales.zvl@zvlslovakia.sk