Bearing - 62206 2RSR C3 ZVL

Bearing - 30204 A KLF

20 × 47 × 15.25 mm. single-row tapered roller bearing for combined radial and axial loads acting in one direction. Its separable design simplifies installation and accurate clearance adjustment.

Bearing - YAR 207 2F SKF

35 × 72 × 42.9 mm. insert bearing has an inner ring extended on both sides and locks onto the shaft with two set screws. A spherical outside surface, contact seals with flingers on both sides and relubrication capability support easy installation and reliable operation.

Bearing - 6204 2RS BBC

20 × 47 × 14 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

Bearing - 309726 DA (VKBC 20012) SKF

34 × 64 × 37 mm. SKF 309726 DA compact double-row angular contact ball bearing, also listed under reference designation VKBC 20012. Intended for hub arrangements carrying combined radial and axial loads in both directions.

Bearing - 519068 M SRO

Dimensions: 50x90x20/52 mm.

bearing for industrial applications. Verify the complete designation, dimensions, design and application requirements in the manufacturer documentation before selection.

Bearing - 6206 2RS ZVL

30 × 62 × 16 mm. single-row deep groove ball bearing with contact rubber seals on both sides. It carries radial and moderate axial loads in both directions while protecting the rolling elements from dust, contamination and lubricant loss.

Bearing - 6301 ZKL

12 × 37 × 12 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 22313 M ZKL

65 × 140 × 48 mm. double-row spherical roller bearing with a solid machined brass cage. Its self-aligning design carries high radial loads, axial loads in both directions and accommodates operating misalignment.

Needle roller bearing - HK 2520 URB

25 × 32 × 20 mm. needle roller bearing for replacement use. Dimensions d × D × B: 25 × 32 × 20 mm. Before ordering, compare the complete designation, dimensions and design with the original part.

Bearing - NJ 2207 ZVL

35 × 72 × 23 mm. single-row cylindrical roller bearing with high radial load capacity. The NJ design locates the shaft axially in one direction and allows relative axial displacement of the rings in the opposite direction.

Bearing - 6208 2Z C3 SKF

40 × 80 × 18 mm. deep-groove ball bearing is a single-row bearing with steel shields on both sides and C3 radial internal clearance. It carries radial loads and moderate axial loads in both directions and is suitable for higher-speed operation.

Bearing - ZARF 50115 TV A INA

50 × 115 × 60 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.