Bearing - 6305 2Z CX

Bearing - B7213-E-T-P4S-UL FAG

Bearing.

Bearing - NU 2207 ZKL

35 × 72 × 23 mm. single-row cylindrical roller bearing for high radial loads. The NU design has two integral flanges on the outer ring and permits axial displacement of the shaft relative to the housing in both directions, making it suitable for a non-locating bearing position.

Bearing - 6003 RS ZKL

17 × 35 × 10 mm. Single-row ZKL 6003-RS deep groove ball bearing with a rubber seal on one side. The sealed side helps protect the lubricant, while the opposite side remains open for the lubrication method defined by the bearing arrangement.

Bearing - 30204 GPZ

20 × 47 × 15.25 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 61804 2RS KINEX

20 × 32 × 7 mm. bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against KINEX documentation and the requirements of the specific application.

Needle roller bearing - HK 1512 CRB

15 × 21 × 12 mm. CRB needle roller bearing HK 1512 for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part. Confirm compatibility using manufacturer documentation and the requirements of the specific application.

Bearing - 7205 CTRDULP3 (2 páry) NSK

25 × 52 × 15 mm. Bearing 7205 CTRDULP3 (2 pairs) NSK.

Needle roller bearing - HK 3520 IBB

35 × 42 × 20 mm. IBB needle roller bearing HK 3520 for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part. Confirm compatibility using manufacturer documentation and the requirements of the specific application.

Bearing - W 6208 2RS1 SKF

40 × 80 × 18 mm. SKF bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - 6203 2RS NSK

17 × 40 × 12 mm. single-row deep-groove ball bearing with contact rubber seals on both sides. The closed design helps retain lubricant and protects the raceways from contamination and moisture.

Bearing - 62206 2RS1 SKF

30 × 62 × 20 mm. Rubber seals on both sides. The deep-groove ball bearing is a single-row bearing with contact seals on both sides. Its 30 × 62 × 20 mm dimensions, factory grease fill and effective lubricant retention make it suitable for compact, protected bearing arrangements.

Bearing - 608 Z ZKL

8 × 22 × 7 mm. Single-row deep-groove ball bearing with a non-contact metal shield on one side (Z). Check the complete designation and application suitability.