Bearing - 6902 2RS DPI
Product detailed description
Bearing - 6902 2RS DPI
6902 2RS DPI is a single-row deep-groove ball bearing with a low cross-section and rubber seals on both sides. Its dimensions are 15 × 28 × 7 mm (bore × outside diameter × width).
Key features
- Compact 69 series: the small outside diameter and width save installation space.
- 2RS design: two rubber seals help retain lubricant and limit the ingress of dust, moisture and other contaminants.
- Versatile construction: suitable for radial loads and moderate axial loads in both directions.
- Sealed design: practical for arrangements requiring limited maintenance.
Typical applications
Small electric motors, fans, compact transmissions, instruments, model mechanisms and other rotating assemblies with limited radial space.
Installation and selection
Use clean tools and apply mounting force only through the ring being press-fitted. Protect the seals from damage and do not wash out the factory lubricant. For replacement, verify the complete 6902 2RS designation, 15 × 28 × 7 mm dimensions, clearance, accuracy and operating conditions.
Product rating
Be the first who will post an article to this item!
We can arrange delivery of almost any DPI product, even if it is not currently listed in our catalogue.
Send us the designation, a photo of the nameplate, dimensions or a description of the application, and we will check availability.
DPI – product identification and supply
The DPI designation may appear on different technical products and spare parts. To identify the exact item reliably, we therefore work from the complete marking and the available technical data.
The exact item should be selected by its complete designation and technical parameters. Dimensions, design, material and operating conditions are important when matching a replacement.
For an accurate quotation, please provide the full marking, required quantity and any available documentation. We will compare the specification and verify a suitable delivery option.