Bearing - NJ 408 STEYR

Bearing - B7007 E 2RSD T P4S UL FAG

35 × 62 × 14 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 3003 2RS C4 INA

17 × 35 × 14 mm. Rubber seals on both sides. Large radial internal clearance.

Needle roller bearing - HK 1612 INA

16 × 22 × 12 mm. INA needle roller bearing HK 1612 for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part. Confirm compatibility using manufacturer documentation and the requirements of the specific application.

Bearing - W 6208 2RS1 SKF

40 × 80 × 18 mm. SKF bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - 30308 AJ2 ZKL

40 × 90 × 25.25 mm. single-row tapered roller bearing for high combined radial and axial loads. Its separable design accommodates axial load in one direction and allows accurate adjustment of clearance or preload during installation.

Bearing - NU 2207 ZKL

35 × 72 × 23 mm. single-row cylindrical roller bearing for high radial loads. The NU design has two integral flanges on the outer ring and permits axial displacement of the shaft relative to the housing in both directions, making it suitable for a non-locating bearing position.

Bearing - 20206 FAG

ball bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against FAG documentation and the requirements of the specific application.

Bearing - 16115 STEYR

75 × 110 × 12 mm. Open single-row deep-groove ball bearing with a slim cross-section. The unshielded and unsealed design provides direct access for lubrication but requires a clean and suitably lubricated installation.

Bearing - 6203 2RS NSK

17 × 40 × 12 mm. single-row deep-groove ball bearing with contact rubber seals on both sides. The closed design helps retain lubricant and protects the raceways from contamination and moisture.

Bearing - 6208 2Z ZKL

40 × 80 × 18 mm. Metal shields on both sides single-row deep-groove ball bearing with a steel cage and non-contact shielding. Low friction and shields on both sides help retain the lubricant inside the bearing.

Bearing - 51205 DKF

25 × 47 × 15 mm. Bearing. Verify the complete designation and dimensions in manufacturer documentation before selection.

Bearing - 32211 A ZKL

55 × 100 × 26,75 mm. single-row tapered roller bearing for high combined radial and one-direction axial loads.