Bearing - NU 204 C3 NA STEYR

Bearing - 7010 CD P4ADBA SKF

50 × 80 × 16 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 6303 2Z KINEX

17 × 47 × 14 mm. bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against KINEX documentation and the requirements of the specific application.

Bearing - 6206 2RS ZVL

30 × 62 × 16 mm. single-row deep groove ball bearing with contact rubber seals on both sides. It carries radial and moderate axial loads in both directions while protecting the rolling elements from dust, contamination and lubricant loss.

Bearing - 32208 A KLF-ZVL

40 × 80 × 24,75 mm. Single-row 32208 A tapered roller bearing for combined radial and axial loads in one direction. The separable cup and cone simplify mounting.

Bearing - YAT 205 SKF

25 × 52 × 27.2 mm. insert ball bearing with a narrow inner ring extended on one side and locking by two set screws. Standard contact seals on both sides protect the grease and bearing interior.

Bearing - 626 2Z FAG

6 × 19 × 6 mm. is a single-row deep-groove ball bearing with two non-contact metal shields. Its versatile design supports radial load and moderate axial loads in both directions, while low friction makes it suitable for higher speeds. The shields help retain lubricant and limit the entry of larger contaminants. This is a general-purpose machine bearing, not a contact-sealed or watertight design.

Bearing - 6203 2RSH SKF

17 × 40 × 12 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A sealed bearing for radial and moderate axial loads in both directions, protected against contamination and lubricant loss.

Bearing - 6305 2Z C3 GJN SKF

25 × 62 × 17 mm. Single-row SKF Explorer 6305-2Z/C3GJN deep groove ball bearing with non-contact sheet-steel shields on both sides and C3 radial internal clearance. The grease-lubricated design is suitable for high rotational speeds.

Bearing - 608 2Z C3 INA

8 × 22 × 7 mm. single-row deep-groove ball bearing with non-contact metal shields on both sides. A low-friction shielded design for radial and limited axial loads in both directions. The C3 suffix denotes greater-than-normal radial internal clearance.

Bearing - 32210 A TPS

Ložisko TPS s úplným označením. Before ordering, compare the full designation and execution with the part used in your equipment.

Bearing - 6004 ZKL

20 × 42 × 12 mm. single-row deep groove ball bearing in open design. A compact bearing for radial and moderate axial loads in both directions, intended for arrangements providing their own lubrication and protection.