Bearings, Page 11
Product sorting
Brands
Inner diameter d (mm)
Outer diameter D (mm)
Width B (mm)
List of products
45x85x19 mm
6209 2RS SKF deep-groove ball bearing with rubber seals on both sides.
15x32x9 mm
6002 Z ZKL deep-groove ball bearing with a metal shield on one side.
9x26x8 mm
629 RS ZKL deep-groove ball bearing with a rubber seal on one side.
60x150x35 mm
Open 6412 ZKL deep-groove ball bearing.
15.875x42.862x14.288 mm
NEU 11590/11520 single-row tapered roller bearing for combined radial and axial load in one direction. The separable cone-and-cup design simplifies mounting and precise adjustment of the bearing arrangement.
8x24x8 mm
Open single-row 628 deep-groove ball bearing for accurate support of small shafts and rotating mechanisms. It carries radial load and limited axial load in both directions.
25x47x12 mm
TIMKEN 6005 2RS single-row deep-groove ball bearing with rubber seals on both sides. A versatile design for radial and limited axial loads in both directions, protected against common contaminants.
17x35x10 mm
ZVL 6003 2RS single-row deep-groove ball bearing with rubber seals on both sides. A versatile design for radial and limited axial loads in both directions, protected against common contaminants.
15x35x11 mm
ZKL 6202 2RS P66 single-row deep-groove ball bearing with rubber seals on both sides. A versatile design for radial and limited axial loads in both directions, protected against common contaminants. Also compare the additional P66 designation when selecting a replacement.
10x26x8 mm
SKF 6000 2Z single-row deep-groove ball bearing with non-contact metal shields on both sides. A low-friction shielded design for radial and limited axial loads in both directions.
8x22x7 mm
INA 608 2Z C3 single-row deep-groove ball bearing with non-contact metal shields on both sides. A low-friction shielded design for radial and limited axial loads in both directions. The C3 suffix denotes greater-than-normal radial internal clearance.
35x42x20 mm
MTM HK 3520 drawn-cup needle roller bearing with open ends and no inner ring. A compact design for high radial loads where radial installation space is limited.
9x26x8 mm
SKF 629 2Z single-row deep-groove ball bearing with non-contact metal shields on both sides. A compact low-friction design for radial and limited axial loads in both directions.
17x30x7 mm
Rubber seals on both sides. Thin-section ZVL single-row deep groove ball bearing for installations with limited radial space.
35x72x17 mm
Rubber seals on both sides. Versatile SKF single-row deep groove ball bearing for reliable rotating assemblies.
25x52x15 mm
Metal shields on both sides. Versatile FAG single-row deep groove ball bearing with non-contact shielding.
15x35x11 mm
Greater C3 radial internal clearance. FAG single-row deep groove ball bearing for arrangements requiring increased internal clearance.
35x72x33 mm
SKF insert ball bearing with a cylindrical bore, spherical outside surface and set-screw locking.