Bearings, Page 10
Product sorting
Brands
Inner diameter d (mm)
Outer diameter D (mm)
Width B (mm)
List of products
Bearing - 6305 2Z ZKL
25 × 62 × 17 mm. Single-row deep groove ball bearing with non-contact metal shields on both sides. It carries radial and limited axial loads in both directions; the shields retain lubricant while maintaining low friction.
Bearing - 625 ZKL
5 × 16 × 5 mm. bearing with clearly stated mounting dimensions. The product name gives no suffix for closure or clearance; compare the complete marking on the original bearing before replacement.
Bearing - 626 2RS EU-ROLL
6 × 19 × 6 mm. Compact single-row deep groove ball bearing with contact rubber seals on both sides, helping protect the lubricant and bearing interior from contaminants.
Bearing - 6700 2Z (61700 2Z) FBJ
10 × 15 × 4 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. It combines low friction and lubricant retention with reliable radial and moderate axial load support in both directions.
Bearing - 3803 2Z P6 FAG
Metal shields on both sides double-row angular contact ball bearing, 17 × 26 × 7 mm. P6 accuracy for more precise, smoother running; the compact design carries combined loads and axial forces in both directions.
Bearing - 624 2RS EU-ROLL
4 × 13 × 5 mm. Single-row deep-groove ball bearing. Rubber seals on both sides; compare the complete designation before ordering.
Bearing - 30305 A KINEX
25 × 62 × 18.25 mm. single-row tapered roller bearing for combined radial and axial loads acting in one direction; its separable design allows the cone assembly and outer ring to be mounted separately.
Bearing - 695 2Z IBB
5 × 13 × 4 mm. Miniature single-row deep groove ball bearing with non-contact sheet-steel shields on both sides. A compact design for small mechanisms requiring low friction and protection of the lubricant from ordinary contaminants.
Bearing - 6004 2RSH SKF
20 × 42 × 12 mm. Single-row SKF Explorer 6004 2RSH deep groove ball bearing with low-friction seals on both sides and normal CN radial clearance. It carries radial and axial loads in both directions, is grease lubricated and requires little maintenance.
Bearing - E 15 ZKL
bearing. For a reliable selection, compare the complete designation and design with the original part.
Bearing - 30306 E ZKL
30 × 72 × 20.75 mm. tapered roller bearing for combined radial and axial loads.
Bearing - 6000 ZR ZKL
10 × 26 × 8 mm. Single-row deep groove ball bearing with a non-contact metal shield on one side. It carries radial and limited axial loads in both directions; the open side provides access to the rolling contact.
Bearing - 6306 Z ZKL
30 × 72 × 19 mm. Single-row deep groove ball bearing with a non-contact metal shield on one side. It carries radial and limited axial loads in both directions; the opposite side remains open.
Bearing - 6202 2RS P66 ZKL
15 × 35 × 11 mm. single-row deep-groove ball bearing with rubber seals on both sides. A versatile design for radial and limited axial loads in both directions, protected against common contaminants. Also compare the additional P66 designation when selecting a replacement.
Bearing - 6006 ZKL
30 × 55 × 13 mm. Open single-row deep groove ball bearing. It primarily carries radial load and also limited axial loads in both directions; the open design provides direct access for lubrication and requires protection from the surrounding arrangement.
Bearing - 1203 DKF
17 × 40 × 12 mm. bearing with the verified designation. Compare the complete designation, dimensional data and design with the original part. Confirm suitability for the specific bearing arrangement in DKF documentation.
Bearing - 6005 2RS SKF
25 × 47 × 12 mm. deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.
Bearing - 6200 2Z MSC
10 × 30 × 9 mm. ball bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against MSC documentation and the requirements of the specific application.