Bearings, Page 15
Product sorting
Brands
Inner diameter d (mm)
Outer diameter D (mm)
Width B (mm)
List of products
35x72x17 mm
Single-row open ZKL 6207 deep groove ball bearing for radial loads and axial loads in both directions. The open design allows the lubrication method to be selected for the specific bearing arrangement.
8x22x7 mm
Miniature single-row NTN 608 ZZ P6E deep groove ball bearing with metal shields on both sides. The shields help retain lubricant and protect the rolling space from larger contaminants while maintaining low friction.
17x35x10 mm
Single-row ZKL 6003-RS deep groove ball bearing with a rubber seal on one side. The sealed side helps protect the lubricant, while the opposite side remains open for the lubrication method defined by the bearing arrangement.
25x52x27.2 mm
SKF YAT 205 insert ball bearing with a narrow inner ring extended on one side and locking by two set screws. Standard contact seals on both sides protect the grease and bearing interior.
30x49.25x13.6 mm
ZKL PLC 23-5 special clutch ball bearing with a pressed-steel housing and steel cage. Intended for the later clutch design used on Škoda 105–130 vehicles; always confirm compatibility by designation and dimensions.
35x72x23 mm
ZKL NU 2207 single-row cylindrical roller bearing for high radial loads. The NU design has two integral flanges on the outer ring and permits axial displacement of the shaft relative to the housing in both directions, making it suitable for a non-locating bearing position.
40x80x18 mm
Metal shields on both sides
ZKL 6208 2Z single-row deep-groove ball bearing with a steel cage and non-contact shielding. Low friction and shields on both sides help retain the lubricant inside the bearing.
65x120x24.75 mm
ZKL 30213 E single-row tapered roller bearing for high combined radial and axial loads. Its separable design accommodates axial load in one direction and allows accurate adjustment of clearance or preload during installation.
40x90x25.25 mm
ZKL 30308 AJ2 single-row tapered roller bearing for high combined radial and axial loads. Its separable design accommodates axial load in one direction and allows accurate adjustment of clearance or preload during installation.
55x78x16 mm
ZKL 51111 A single-direction thrust ball bearing for carrying axial load in one direction. Its separable design simplifies mounting and inspection of the individual components.
30x62x35.7 mm
FAG 16206 S-type bearing insert for mounting a 30 mm shaft in a suitable bearing housing. The extended inner ring with two locking screws provides straightforward and reliable shaft location.
30x72x19 mm
Open ZKL 6306 single-row deep-groove ball bearing for reliable radial and limited axial load carrying. Its versatile non-separable design suits a wide range of machinery applications.
25x47x12 mm
Open ZKL 6005 single-row deep-groove ball bearing for reliable radial and limited axial load carrying. Its versatile non-separable design suits a wide range of machinery applications.
17x35x10 mm
ZKL 6003 Z single-row deep-groove ball bearing with a non-contact metal shield on one side. The shield limits coarse contamination while retaining low friction and good high-speed capability.
25x47x12 mm
ZKL 6005 RS single-row deep-groove ball bearing with a contact rubber seal on one side. The seal improves protection against contamination and moisture while the opposite side remains open.
25x62x17 mm
TIMKEN 6305 2RS single-row deep-groove ball bearing with contact rubber seals on both sides. The closed design helps retain lubricant and protects the raceways from contamination and moisture.
15x35x11 mm
Open FLT 6202 single-row deep-groove ball bearing for reliable radial and limited axial load carrying. Its versatile non-separable design suits a wide range of machinery applications.
15x42x13 mm
KINEX 6302 2RS single-row deep-groove ball bearing with contact rubber seals on both sides. The closed design helps retain lubricant and protects the raceways from contamination and moisture.