Bearings, Page 16
Product sorting
Brands
Inner diameter d (mm)
Outer diameter D (mm)
Width B (mm)
List of products
INA KSO20-PP is an open self-aligning linear ball bearing designed for precise and smooth linear motion on a supported guide shaft with a diameter of 20 mm. The PP version is fitted with lip seals on both sides to help protect the internal components against contamination and retain lubricant.
Dimensions: 20 × 32 × 45 mm.
20x52x15 mm
KINEX 6304 2RS single-row deep-groove ball bearing with contact rubber seals on both sides. The closed design helps retain lubricant and protects the raceways from contamination and moisture.
12x55x11
Special neu TR55ZZ HIC0102 bearing with a 12 mm bore, 55 mm outside diameter and 11 mm width. Before ordering, compare the complete designation and the actual shielding design with the original component.
75x110x12 mm
Open STEYR 16115 single-row deep-groove ball bearing with a slim cross-section. The unshielded and unsealed design provides direct access for lubrication but requires a clean and suitably lubricated installation.
25 × 52 × 31 mm
SKF YET 205 insert bearing with an eccentric locking collar and a narrow inner ring. It is designed for installation in a matching bearing housing and for locking onto a 25 mm shaft.
10x26x8 mm
KINEX 6000 2RS single-row deep-groove ball bearing with contact rubber seals on both sides. The closed design helps retain lubricant and protects the raceways from contamination and moisture.
56x85x40 mm
neu GE 56 radial spherical plain bearing for oscillating and tilting motion at low sliding speeds. Its spherical sliding surfaces carry radial load and accommodate angular misalignment between the shaft and housing.
30x62x16 mm
SKF 6206 2RS C3 single-row deep-groove ball bearing with contact rubber seals on both sides and C3 radial internal clearance.
50x80x16 mm
ZKL 6010 single-row deep-groove ball bearing in an open design, with no sealing or clearance suffix shown in the designation.
17x26x5 mm
Compact KINEX 61803 2RS single-row deep-groove ball bearing with contact rubber seals on both sides.
8x22x7 mm
Legacy SKF EL 8 designation for a single-row deep-groove ball bearing in the 608 dimensional series; verify the actual closure and clearance markings.
50x90x20 mm
ZKL 6210 single-row deep-groove ball bearing in an open design, with no sealing or clearance suffix shown in the designation.
17x40x12 mm
NSK 6203 2RS single-row deep-groove ball bearing with contact rubber seals on both sides. The closed design helps retain lubricant and protects the raceways from contamination and moisture.
17x40x12 mm
CW 6203 2RS single-row deep-groove ball bearing with contact rubber seals on both sides. The closed design helps retain lubricant and protects the raceways from contamination and moisture.
15x28x7 mm
Compact KINEX 61902 2RS single-row deep-groove ball bearing with contact rubber seals on both sides.
25x47x15 mm
ZVL 32005 AX single-row tapered roller bearing for combined radial and one-direction axial loads; the separable design requires correct clearance or preload adjustment.
20x52x16.25 mm
KINEX 30304 A single-row tapered roller bearing for combined radial and one-direction axial loads; the separable design requires correct clearance or preload adjustment.
8x24x8 mm
ZKL 628 2Z single-row deep-groove ball bearing with non-contact metal shields on both sides for low friction and protection from ordinary contamination.