Bearings, Page 17
Product sorting
Brands
Inner diameter d (mm)
Outer diameter D (mm)
Width B (mm)
List of products
55x78x16 mm
ZVL 51111 single-direction thrust ball bearing for purely axial loads acting in one direction; its separable design makes correct installation of the individual components easier.
10x19x5 mm
MTM 61800 2Z thin-section single-row deep-groove ball bearing with non-contact metal shields on both sides for compact arrangements, low friction and protection from ordinary contaminants.
40x80x18 mm
DPI 6208 single-row deep-groove ball bearing for reliable radial-load support together with limited axial loads in both directions.
10x19x7 mm
Compact SKF 63800 2Z single-row deep-groove ball bearing with non-contact metal shields on both sides for low friction and protection from ordinary contaminants.
8x28x9 mm
KBS 638 2RS single-row deep-groove ball bearing with rubber seals on both sides for improved protection of the lubricant and raceways in normally dusty or damp operation.
65x100x18 mm
ZVL 6013 2RS single-row deep-groove ball bearing with rubber seals on both sides for improved protection of the lubricant and raceways in normally dusty or damp operation.
30x62x21.25 mm
ZKL 32206 A single-row tapered roller bearing for combined radial and axial loads acting in one direction; its separable design allows the cone assembly and outer ring to be mounted separately.
45x85x23 mm
INA SL182209-A-XL single-row full-complement cylindrical roller bearing in X-life design for very high radial loads and axial guidance in one direction.
25x52x15 mm
FAG 7205-B-XL-2RS-TVP single-row angular-contact ball bearing in X-life design, with rubber seals on both sides and a polyamide cage.
35x72x18.25 mm
KINEX 30207 A single-row tapered roller bearing for combined radial and axial loads acting in one direction; its separable design allows the cone assembly and outer ring to be mounted separately.
30x72x19 mm
SKF 6306-2Z/C3 single-row deep-groove ball bearing with non-contact metal shields on both sides and greater-than-normal C3 radial clearance.
25x62x18.25 mm
KINEX 30305 A single-row tapered roller bearing for combined radial and axial loads acting in one direction; its separable design allows the cone assembly and outer ring to be mounted separately.
30x62x17.25 mm
30206 A KINEX is a single-row tapered roller bearing for combined radial and axial loads. Its separable design simplifies mounting and precise adjustment of clearance or preload.
45x100x27.25 mm
30309 A ZVL is a single-row tapered roller bearing for combined radial and axial loads. Its separable design simplifies mounting and precise adjustment of clearance or preload.
25x52x15 mm
6205 2RS CX is a single-row deep-groove ball bearing with rubber seals on both sides. It protects the lubricant and raceways from common contaminants while carrying radial and limited axial loads.
17x47x14 mm
6303 2ZV neu is a single-row deep-groove ball bearing with metal shields on both sides. It combines low friction, protection against common solid contaminants and support for radial and limited axial loads.
40x80x23 mm
NU 2208 E ZVL is a single-row cylindrical roller bearing for high radial loads. The NU design permits axial displacement of the shaft relative to the housing in both directions and is suited to non-locating positions.
17x35x10 mm
6003 C3 ZKL is an open single-row deep-groove ball bearing with greater-than-normal C3 radial internal clearance. It suits radial and limited axial loads where operating conditions require additional internal clearance.