Bearings, Page 2
Product sorting
List of products
Bearing - 6906 2RS EZO
30 × 47 × 9 mm. Thin-section, single-row deep groove ball bearing with contact rubber seals on both sides. The CN-clearance design with a steel cage combines compact dimensions with protection of the lubricant from ordinary contaminants.
Bearing - 51106 A ZKL
30 × 47 × 11 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
Bearing - 6005 ZKL
25 × 47 × 12 mm. Open single-row deep-groove ball bearing for reliable radial and limited axial load carrying. Its versatile non-separable design suits a wide range of machinery applications.
Bearing - 30303 A KINEX
17 × 47 × 15.25 mm. KINEX single-row tapered roller bearing for combined radial and axial loads in one direction.
Bearing - 3204 ZKL
20 × 47 × 20 mm. double-row angular contact ball bearing in an open design. For combined radial and axial loads in either direction.
Bearing - B7204 C T P4S UL FAG
20 × 47 × 14 mm. FAG B7204-C-T-P4S-UL super-precision spindle bearing with a 15° contact angle, textile-phenolic cage and universal matching for light preload. Designed for precise high-speed spindle arrangements.
Bearing - 6906 2RS NTN
30 × 47 × 9 mm. Thin-section, single-row deep groove ball bearing with contact rubber seals on both sides, CN clearance and a pressed-steel cage. The compact design is intended for sealed arrangements with limited radial space.
Bearing - 6005 RS ZKL
25 × 47 × 12 mm. single-row deep-groove ball bearing with a contact rubber seal on one side. The seal improves protection against contamination and moisture while the opposite side remains open.
Bearing - 3204 2RS ZVL
20 × 47 × 20 mm. double-row angular contact ball bearing with rubber seals on both sides for combined radial and axial loads.
Bearing - 6303 2ZV neu
17 × 47 × 14 mm. is a single-row deep-groove ball bearing with metal shields on both sides. It combines low friction, protection against common solid contaminants and support for radial and limited axial loads.
Bearing - 6303 2RS SKF
17 × 47 × 14 mm. is a single-row deep-groove ball bearing with contact rubber seals on both sides. It supports radial and limited axial loads while protecting the lubricant and raceways in commonly contaminated operation.
Bearing - 6906 ZZ IBB
30 × 47 × 9 mm. Thin-section single-row deep groove ball bearing with metal shields on both sides. Its compact cross-section, low friction and two-sided protection suit space-constrained rotating arrangements.
Bearing - 6303 2RSH SKF
17 × 47 × 14 mm. is a single-row deep-groove ball bearing with contact seals on both sides. The seals help retain lubricant and protect the rolling space from dust, moisture and other common contaminants. Its versatile design supports radial load and moderate axial loads in both directions. It is well suited to applications where dependable bearing protection and low maintenance requirements are important.
Bearing - 6005 FAG
25 × 47 × 12 mm. is an open, single-row deep-groove ball bearing. It supports radial load and moderate axial loads in both directions, while its low-friction design makes it suitable for higher speeds. The open design has no shields or seals, allowing easy lubricant access and effective heat dissipation. It therefore requires a clean arrangement with suitable lubrication or external sealing.
Bearing - 30303 MGK
17 × 47 × 15.25 mm. tapered roller bearing is a single-row, separable bearing for combined radial and axial loads. Its tapered raceways carry axial load in one direction; bearings are normally paired where axial load must be supported in both directions.
Bearing - 6204 2Z CX
20 × 47 × 14 mm. single-row deep-groove ball bearing with non-contact metal shields on both sides for lubricant protection and low friction.
Bearing - 6204 2ZNR SKF
20 × 47 × 14 mm. deep-groove ball bearing is a single-row radial bearing with non-contact metal shields on both sides. It supports radial loading and moderate axial forces in either direction. The 2Z shields help retain lubricant and keep out coarse contaminants while maintaining low friction and suitability for higher speeds. The outer-ring groove and supplied NR snap ring provide straightforward axial….
Bearing - 6204 2ZR FAG
20 × 47 × 14 mm. FAG bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.