Bearings, Page 3
Product sorting
List of products
25x62x17 mm
6305 2RSR FAG is a single-row deep-groove ball bearing with contact seals on both sides. The seals help retain lubricant and protect the rolling space from dust, moisture and other common contaminants.
Its versatile design supports radial load and moderate axial loads in both directions. It is well suited to applications where dependable bearing protection and low maintenance requirements are important.
25x47x12 mm
6005 FAG is an open, single-row deep-groove ball bearing. It supports radial load and moderate axial loads in both directions, while its low-friction design makes it suitable for higher speeds.
The open design has no shields or seals, allowing easy lubricant access and effective heat dissipation. It therefore requires a clean arrangement with suitable lubrication or external sealing.
25x52x15 mm
6205 2RS DPI is a single-row deep-groove ball bearing with contact seals on both sides. The seals help retain lubricant and protect the rolling space from dust, moisture and other common contaminants.
Its versatile design supports radial load and moderate axial loads in both directions. It is well suited to applications where dependable bearing protection and low maintenance requirements are important.
25x42x9 mm
61905 2RS1 SKF thin-section deep-groove ball bearing with contact seals on both sides for compact arrangements and effective lubricant protection.
25x52x18 mm
2205 ZKL double-row self-aligning ball bearing with a spherical outer-ring raceway to accommodate misalignment and shaft deflection.
25x62x17 mm
6305 F-HTO SKWC GERMANY deep-groove ball bearing is a single-row bearing in dimension series 63 for a 25 mm shaft. It carries radial loads and moderate axial loads in both directions and suits accurately aligned, smooth-running rotating assemblies. F-HTO is a manufacturer-specific variant code; verify its exact meaning and operating parameters against the original bearing or technical documentation before substitution.
25x47x12 mm
6005 2RS SKF deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.
EZO 6805 2RS extra-thin single-row deep-groove ball bearing with contact rubber seals on both sides. Official manufacturer data: 25 × 37 × 7 mm, 4.3 kN dynamic load rating, 2.94 kN static load rating and 10,000 rpm limiting speed. MPN 6805 2RS.
25x52x15 mm
S 6205 2RS MTM deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The S prefix forms part of the complete product designation.
25x52x15 mm
The 6205 2Z NSK deep-groove ball bearing is a single-row radial bearing with non-contact metal shields on both sides. The shields help retain lubricant and limit the ingress of common contaminants while maintaining low running friction.
Suitable for electric motors, fans, pumps, gearboxes, conveyors and other rotating equipment. The 2Z suffix denotes two metal shields; this is not a watertight design.
25x42x9 mm
The 61905 2RS KINEX thin-section deep-groove ball bearing is a compact single-row bearing with contact rubber seals on both sides. It combines a small radial cross-section and low weight with the ability to support radial loads and moderate axial forces in both directions.
Suitable for small electric motors, instruments, gearboxes, robotics and other mechanisms with restricted radial space.
25x42x20 mm
The GE 25 E 2RS ZVL radial spherical plain bearing has spherical sliding surfaces and rubber seals on both sides. It accommodates oscillating movement and misalignment while supporting high radial and combined loads.
Suitable for hydraulic cylinders, linkages, articulated mechanisms, agricultural and construction machinery. Its steel sliding surfaces require appropriate lubrication.
6305 2ZC3 SKF deep-groove ball bearing is a single-row bearing with steel shields on both sides and C3 radial internal clearance. It carries radial loads and moderate axial loads in both directions and is suitable for higher-speed operation.
1205 KINEX self-aligning ball bearing has two rows of balls, a cylindrical bore and a common spherical raceway in the outer ring. It accommodates angular misalignment between shaft and housing and operates with low friction, including at higher speeds.
The UC 205 CRAFT insert bearing is a sealed ball-bearing insert with a spherical outside surface and an extended inner ring. It is secured to the shaft by two grub screws and is designed for installation in a matching bearing housing.
Suitable for conveyors, fans, agricultural machinery and simple industrial drives. This product is the UC insert only; a complete housing is not included.
25x42x11 mm
ZKL 51105 thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
NU 2205 URB single-row cylindrical roller bearing is a separable bearing for high radial loads. The NU design has two integral flanges on the outer ring and a flangeless inner ring, allowing axial displacement of the shaft relative to the housing in both directions.
Deep groove ball bearing 6205 2Z ZVL is a single-row bearing with non-contact metal shields on both sides. It accommodates radial loads and moderate axial loads in both directions.
The 2Z design helps retain lubricant and limits the ingress of common contaminants while maintaining low friction. The shields are not watertight and are not intended for direct exposure to liquids.