Bearings, Page 2
Product sorting
List of products
25x47x12 mm
TIMKEN 6005 2RS single-row deep-groove ball bearing with rubber seals on both sides. A versatile design for radial and limited axial loads in both directions, protected against common contaminants.
25x52x15 mm
Metal shields on both sides. Versatile FAG single-row deep groove ball bearing with non-contact shielding.
25x52x15 mm
Contact seals of synthetic rubber (NBR) on both sides. Versatile SKF deep groove ball bearing for protected arrangements.
25x52x16.25 mm
KBS single-row tapered roller bearing for combined radial and axial load in one direction.
25x52x15 mm
SKF single-row deep groove ball bearing with contact seals on both sides (2RS1).
25x62x17 mm
ZKL 6305 single-row deep-groove ball bearing in an open design.
For radial loads and limited axial loads in either direction.
25x52x15 mm
SKF 6205 2Z/C3 single-row deep-groove ball bearing with metal shields on both sides.
C3 denotes greater-than-normal radial internal clearance; for radial and limited axial loads in either direction.
25x42x17 mm
DKF NU 4905 single-row cylindrical roller bearing in NU design for high radial loads. The outer ring has two integral flanges and the inner ring has no flanges, allowing axial displacement of the shaft relative to the housing in both directions.
25x62x17 mm
ZKL NJ 305 NA P6 single-row cylindrical roller bearing with high radial capacity, axial guidance in one direction and increased P6 accuracy. The NA design uses matched, non-interchangeable rings.
25x37x7 mm
Single-row SKF 61805 2RS deep groove ball bearing with compact dimensions; the corresponding SKF catalogue designation is 61805-2RS1. Contact seals on both sides help retain the grease and protect the bearing against contamination.
25x47x12 mm
Open ZKL 6005 single-row deep-groove ball bearing for reliable radial and limited axial load carrying. Its versatile non-separable design suits a wide range of machinery applications.
25x47x12 mm
ZKL 6005 RS single-row deep-groove ball bearing with a contact rubber seal on one side. The seal improves protection against contamination and moisture while the opposite side remains open.
25x62x17 mm
TIMKEN 6305 2RS single-row deep-groove ball bearing with contact rubber seals on both sides. The closed design helps retain lubricant and protects the raceways from contamination and moisture.
25 × 52 × 31 mm
SKF YET 205 insert bearing with an eccentric locking collar and a narrow inner ring. It is designed for installation in a matching bearing housing and for locking onto a 25 mm shaft.
25x52x15 mm
FAG 7205-B-XL-2RS-TVP single-row angular-contact ball bearing in X-life design, with rubber seals on both sides and a polyamide cage.
25x62x18.25 mm
KINEX 30305 A single-row tapered roller bearing for combined radial and axial loads acting in one direction; its separable design allows the cone assembly and outer ring to be mounted separately.
25x52x15 mm
6205 2RS CX is a single-row deep-groove ball bearing with rubber seals on both sides. It protects the lubricant and raceways from common contaminants while carrying radial and limited axial loads.
25x62x17 mm
6305 2ZR FAG is a single-row deep-groove ball bearing with two non-contact metal shields. Its versatile design supports radial load and moderate axial loads in both directions, while low friction makes it suitable for higher speeds.
The shields help retain lubricant and limit the entry of larger contaminants. This is a general-purpose machine bearing, not a contact-sealed or watertight design.