Bearings, Page 31

Bearing - 51205 DKF

25 × 47 × 15 mm. Bearing. Verify the complete designation and dimensions in manufacturer documentation before selection.

Bearing - 51102 URB

15 × 28 × 9 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.

Bearing - 3304 C3 ZKL

20 × 52 × 22 mm. Greater radial internal clearance. Double-row angular-contact ball bearing for rigid arrangements under combined loads. It carries radial load and axial loads in both directions; C3 clearance provides extra allowance where thermal expansion or tight fits reduce operating clearance.

Bearing - 32008 JR DPI

40 × 68 × 19 mm. Single-row tapered roller bearing for high radial loads combined with axial load in one direction. Its separable design simplifies mounting and allows running clearance or preload to be set in a paired arrangement.

Bearing - 31307 MGM

35 × 80 × 22.75 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 30213 A P6X ZVL

65 × 120 × 24.75 mm. Single-row tapered roller bearing for combined radial load and axial load in one direction. The P6X precision version is intended for arrangements with higher dimensional and running-accuracy requirements; the complete A P6X designation must match the machine documentation.

Bearing - 30210 A P6X ZVL

50 × 90 × 21.75 mm. Single-row tapered roller bearing for high radial loads and axial load in one direction. The P6X tolerance version is intended for arrangements with higher accuracy requirements; the complete A P6X designation must match when replacing the bearing.

Bearing - 16005 NTN

25 × 47 × 8 mm. NTN bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Bearing - GYE 35 KRR B INA

35 × 72 × 42.9 mm. Radial insert ball bearing with a spherical outside surface, extended inner ring and locking by grub screws. Seals on both sides protect the rolling contact; the bearing is designed for installation in a matching bearing housing.

Bearing - DL 4020 NADELLA

40 × 48 × 20 mm. Full-complement drawn-cup needle roller bearing with open ends and without an inner ring. It provides high radial load capacity within a very small radial section.

Bearing - NU 4908 DKF

40 × 62 × 22 mm. Single-row cylindrical roller bearing for high radial loads and free axial displacement of the shaft relative to the housing in both directions. The NU design has two guiding flanges on the outer ring and a flange-free inner ring.

Bearing - NKIA 5904 INA

needle roller/angular contact ball bearing without a seal.

Bearing - 6308 2Z C3 SKF

40 × 90 × 23 mm. Metal shields on both sides. Greater radial internal clearance. Single-row deep-groove ball bearing for radial load and axial loads in both directions. Two non-contact metal shields retain lubricant with low friction; C3 clearance provides allowance for tight fits or elevated operating temperature.

Bearing - 6210 2RSR ZVL

50 × 90 × 20 mm. Rubber seals on both sides. Single-row deep-groove ball bearing for radial load and moderate axial loads in both directions. Contact rubber seals on both sides retain lubricant and protect the rolling elements from dust, contaminants and splashing moisture.

Bearing - 6208 2Z ROLLWAY

40 × 80 × 18 mm. Metal shields on both sides. Single-row deep-groove ball bearing for radial load and moderate axial loads in both directions. Non-contact metal shields retain grease with low friction and protect against ordinary dry contamination.