Bearings, Page 32
Product sorting
Brands
Inner diameter d (mm)
Outer diameter D (mm)
Width B (mm)
List of products
50x80x20 mm
Single-row tapered roller bearing 32010 JR DPI for high radial load combined with axial load in one direction. Its separable design allows the inner ring with rollers and the outer ring to be mounted independently.
25x52x18 mm
SKF bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
GB1816 Torrington needle roller and cage assembly without seal, weight 0.048 kg. (d 28.575 × D 34.925 × B 25.4 mm).
30x62x16 mm
NUP 206 E ZVL single-row cylindrical roller bearing carries high radial loads and locates the shaft axially in both directions through its flange arrangement. The E suffix denotes an optimized internal design with increased load capacity.
35x80x21 mm
NJ 307 URB single-row cylindrical roller bearing is designed for high radial loads and can also locate the shaft axially in one direction. Its separable construction allows the inner ring to be installed independently of the outer ring and roller assembly.
35x55x20 mm
NA 4907 DKF needle roller bearing with machined rings and its own inner ring provides high radial load capacity within a small radial section. It is suitable where the shaft surface cannot be used directly as a precision raceway.
12x37x12 mm
6301 Z ZKL single-row deep groove ball bearing with a non-contact metal shield on one side. Suitable for radial and moderate axial loads in both directions when one side of the bearing needs protection from coarse contamination.
35x72x17 mm
6207 RS ZKL single-row deep groove ball bearing with a contact rubber seal on one side. Suitable for radial and moderate axial loads in both directions when one side requires improved protection from dust, contamination and lubricant loss.
12x32x10 mm
6201 FAG single-row deep groove ball bearing in an open design is a versatile choice for radial loads and moderate axial loads in both directions. It offers low friction and smooth running.
25x42x11 mm
ZKL 51105 P6 thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
30x62x20 mm
NU 2206 BNA P62 ZKL single-row cylindrical roller bearing is designed for high radial loads and allows axial displacement of the shaft relative to the housing in both directions. P62 denotes P6 dimensional and running accuracy combined with reduced C2 radial internal clearance.
35x72x23 mm
NJ 2207 ZKL single-row cylindrical roller bearing is designed for high radial loads and can also locate the shaft axially in one direction. Its separable construction allows the inner ring to be installed independently of the outer ring and roller assembly.
40.988x67.975x17.501 mm
LM300811/LM300849 TIMKEN single-row tapered roller bearing set consists of the LM300849 inner cone and the LM300811 outer cup. This imperial-series design carries radial load together with axial load in one direction.
40x100x25 mm
Rolling bearing 6408 ZVL for use in machinery and equipment.
35x80x21 mm
6307 2RSR KINEX single-row deep groove ball bearing with contact rubber seals on both sides. A dependable choice for radial and bidirectional axial loads where retaining lubricant and protecting the bearing interior from contamination are important.
10x26x8 mm
6000 2RSH C3 SKF deep groove ball bearing has contact rubber seals on both sides and greater-than-normal C3 radial internal clearance. The seals protect lubricant and raceways, while C3 provides allowance for clearance reduction caused by fits or operating temperature.
30x72x19 mm
MGM bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.