Bearing - NA 4912 CX

Bearing - 6204 2RS ZVL

20 × 47 × 14 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A compact solution for radial and moderate axial loads in both directions, protected against dust, contamination and lubricant loss.

Bearing - 22218 EW33J ZKL

90 × 160 × 40 mm. double-row spherical roller bearing for replacement use. Before ordering, compare the complete designation and verify the dimensions, design and fit with the original part. Confirm compatibility against ZKL documentation and the requirements of the specific application.

Bearing - YAT 205 SKF

25 × 52 × 27.2 mm. insert ball bearing with a narrow inner ring extended on one side and locking by two set screws. Standard contact seals on both sides protect the grease and bearing interior.

Bearing - 6001 2Z SKF

12 × 28 × 8 mm. single-row deep groove ball bearing with non-contact metal shields on both sides. It combines low friction and lubricant retention with the ability to carry radial and moderate axial loads in both directions.

Bearing - NU 2207 ZKL

35 × 72 × 23 mm. single-row cylindrical roller bearing for high radial loads. The NU design has two integral flanges on the outer ring and permits axial displacement of the shaft relative to the housing in both directions, making it suitable for a non-locating bearing position.

Bearing - 7216 ACTB P5 ZKL

80 × 140 × 26 mm. Precision single-row angular contact ball bearing for combined radial and one-direction axial loads. Accuracy class P5 supports smooth, precise running in demanding bearing arrangements.

Bearing - 6201 C3 KINEX

12 × 32 × 10 mm. Greater radial internal clearance.

Bearing - 6201 2ZR ZKL

Bearing - is a single-row deep groove ball bearing with a cylindrical bore, standard steel cage and two metallic shields 2ZR. The shields adhere to the flat surface of the inner ring. Dimensions: inner diameter d 12 mm, outer diameter D 32 mm, width B 10 mm; weight 0.037 kg. The bearing has normal. Cn internal clearance, standard precision and standard lubrication. confirms no external….

Needle roller bearing - HK 3018 2RS INA

30 × 37 × 18 mm. INA needle roller bearing HK 3018 2RS for replacement use. Before ordering, compare the complete designation and verify dimensions, design and fit with the original part. Confirm compatibility using manufacturer documentation and the requirements of the specific application.

Bearing - 6007 2RS1 SKF

35 × 62 × 14 mm. Rubber seals on both sides.

Bearing - 51205 DKF

25 × 47 × 15 mm. Bearing. Verify the complete designation and dimensions in manufacturer documentation before selection.