Bearings, Page 2
Product sorting
List of products
Bearing - 61906 2RS ZVL
30 × 47 × 9 mm. Rubber seals on both sides.
Bearing - 7206 ZKL
30 × 62 × 16 mm. angular-contact ball bearing for combined radial and axial loads.
Bearing - 6906 2RS EZO
30 × 47 × 9 mm. Thin-section, single-row deep groove ball bearing with contact rubber seals on both sides. The CN-clearance design with a steel cage combines compact dimensions with protection of the lubricant from ordinary contaminants.
Bearing - 6306 2RS1 C3 SKF
30 × 72 × 19 mm. Rubber seals on both sides. Greater C3 radial internal clearance. Robust SKF single-row deep groove ball bearing for demanding rotating assemblies.
Bearing - 51106 A ZKL
30 × 47 × 11 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
Bearing - 1206 ZKL
30 × 62 × 16 mm. double-row self-aligning ball bearing with a cylindrical bore and open design. Accommodates shaft-to-housing misalignment; for radial and light axial loads in either direction.
Bearing - 6006 2Z ZKL
30 × 55 × 13 mm. single-row deep-groove ball bearing with metal shields on both sides. For radial loads and limited axial loads in either direction.
Bearing - 2306 ZKL
30 × 72 × 27 mm. double-row self-aligning ball bearing for arrangements with minor shaft-to-housing misalignment. Dynamic load rating 32.3 kN, mass 0.50 kg.
Bearing - 6006 ZVL
30 × 55 × 13 mm. single-row open deep groove ball bearing for radial and axial loads in both directions. Dynamic load rating 13.24 kN, mass 0.111 kg.
Bearing - 6906 2RS NTN
30 × 47 × 9 mm. Thin-section, single-row deep groove ball bearing with contact rubber seals on both sides, CN clearance and a pressed-steel cage. The compact design is intended for sealed arrangements with limited radial space.
Bearing - 6306 ZKL
30 × 72 × 19 mm. Open single-row deep-groove ball bearing for reliable radial and limited axial load carrying. Its versatile non-separable design suits a wide range of machinery applications.
Bearing - 6206 ZKL
30 × 62 × 16 mm. ZKL bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
Bearing - 6206 2RS C3 SKF
30 × 62 × 16 mm. single-row deep-groove ball bearing with contact rubber seals on both sides and C3 radial internal clearance.
Bearing - 32206 A ZKL
30 × 62 × 21.25 mm. single-row tapered roller bearing for combined radial and axial loads acting in one direction; its separable design allows the cone assembly and outer ring to be mounted separately.
Bearing - 6306 2Z C3 SKF
30 × 72 × 19 mm. SKF 6306-2Z/C3 single-row deep-groove ball bearing with non-contact metal shields on both sides and greater-than-normal C3 radial clearance.
Bearing - 30206 A KINEX
30 × 62 × 17.25 mm. is a single-row tapered roller bearing for combined radial and axial loads. Its separable design simplifies mounting and precise adjustment of clearance or preload.
Bearing - 6306 RS FLT
30 × 72 × 19 mm. Single-row deep groove ball bearing with a rubber seal on one side. This versatile design for radial and moderate axial loads combines protection with access for lubrication from the open side.
Bearing - 6906 ZZ IBB
30 × 47 × 9 mm. Thin-section single-row deep groove ball bearing with metal shields on both sides. Its compact cross-section, low friction and two-sided protection suit space-constrained rotating arrangements.