Bearings, Page 2
Product sorting
List of products
17x40x12 mm
ZKL 1203 double-row self-aligning ball bearing with a cylindrical bore and open design.
Accommodates shaft-to-housing misalignment; for radial and light axial loads in either direction.
17x35x10 mm
Single-row ZKL 6003-RS deep groove ball bearing with a rubber seal on one side. The sealed side helps protect the lubricant, while the opposite side remains open for the lubrication method defined by the bearing arrangement.
17x35x10 mm
ZKL 6003 Z single-row deep-groove ball bearing with a non-contact metal shield on one side. The shield limits coarse contamination while retaining low friction and good high-speed capability.
17x26x5 mm
Compact KINEX 61803 2RS single-row deep-groove ball bearing with contact rubber seals on both sides.
17x40x12 mm
NSK 6203 2RS single-row deep-groove ball bearing with contact rubber seals on both sides. The closed design helps retain lubricant and protects the raceways from contamination and moisture.
17x40x12 mm
CW 6203 2RS single-row deep-groove ball bearing with contact rubber seals on both sides. The closed design helps retain lubricant and protects the raceways from contamination and moisture.
17x47x14 mm
6303 2ZV neu is a single-row deep-groove ball bearing with metal shields on both sides. It combines low friction, protection against common solid contaminants and support for radial and limited axial loads.
17x35x10 mm
6003 C3 ZKL is an open single-row deep-groove ball bearing with greater-than-normal C3 radial internal clearance. It suits radial and limited axial loads where operating conditions require additional internal clearance.
17x47x14 mm
6303 2RS SKF is a single-row deep-groove ball bearing with contact rubber seals on both sides. It supports radial and limited axial loads while protecting the lubricant and raceways in commonly contaminated operation.
17x47x14 mm
6303 2RSH SKF is a single-row deep-groove ball bearing with contact seals on both sides. The seals help retain lubricant and protect the rolling space from dust, moisture and other common contaminants.
Its versatile design supports radial load and moderate axial loads in both directions. It is well suited to applications where dependable bearing protection and low maintenance requirements are important.
17x35x10 mm
6003 2Z ZVL is a single-row deep-groove ball bearing with two non-contact metal shields. Its versatile design supports radial load and moderate axial loads in both directions, while low friction makes it suitable for higher speeds.
The shields help retain lubricant and limit the entry of larger contaminants. This is a general-purpose machine bearing, not a contact-sealed or watertight design.
17x35x10 mm
6003 2RSH SKF single-row deep-groove ball bearing with high-performance contact seals on both sides for reliable protection of the lubricant and bearing interior.
17x35x10 mm
6003 2Z ZKL single-row deep-groove ball bearing with metal shields on both sides for lubricant protection and low friction.
17x35x10 mm
6003 2RS FAG deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The 2RS design helps protect the internal rolling contact from dust and moisture while retaining lubricant inside the bearing.
17x40x12 mm
6203 C C3 FAG deep-groove ball bearing is an open single-row Generation C bearing with greater-than-normal C3 radial internal clearance. It supports radial loads and moderate axial forces in both directions with low friction. C3 provides extra allowance for thermal expansion or tighter fits, but it must match the machine design.
17x47x15.25 mm
30303 MGK tapered roller bearing is a single-row, separable bearing for combined radial and axial loads. Its tapered raceways carry axial load in one direction; bearings are normally paired where axial load must be supported in both directions.
17x40x17 mm
The 3203 2RS neu double-row angular contact ball bearing supports radial loads, axial forces in both directions and tilting moments. Contact rubber seals on both sides help retain grease and protect the raceways from common contaminants.
A compact solution for gearboxes, pumps, hubs, agricultural machinery and other positions requiring increased axial rigidity.
61903 2RS1 SKF deep-groove ball bearing is a single-row bearing with contact rubber seals on both sides. It carries radial loads and moderate axial loads in both directions, while the factory grease is protected against leakage and common contaminants.