Bearings, Page 2

20x52x15 mm
KINEX 6304 2RS single-row deep-groove ball bearing with contact rubber seals on both sides. The closed design helps retain lubricant and protects the raceways from contamination and moisture.

25 × 52 × 31 mm

SKF YET 205 insert bearing with an eccentric locking collar and a narrow inner ring. It is designed for installation in a matching bearing housing and for locking onto a 25 mm shaft.

20x52x16.25 mm
KINEX 30304 A single-row tapered roller bearing for combined radial and one-direction axial loads; the separable design requires correct clearance or preload adjustment.

25x52x15 mm

6205 2RS CX is a single-row deep-groove ball bearing with rubber seals on both sides. It protects the lubricant and raceways from common contaminants while carrying radial and limited axial loads.

20x52x15 mm

6304 2RSH SKF is a single-row deep-groove ball bearing with contact seals on both sides. The seals help retain lubricant and protect the rolling space from dust, moisture and other common contaminants.

Its versatile design supports radial load and moderate axial loads in both directions. It is well suited to applications where dependable bearing protection and low maintenance requirements are important.

25x52x15 mm

6205 2RS DPI is a single-row deep-groove ball bearing with contact seals on both sides. The seals help retain lubricant and protect the rolling space from dust, moisture and other common contaminants.

Its versatile design supports radial load and moderate axial loads in both directions. It is well suited to applications where dependable bearing protection and low maintenance requirements are important.

20x52x16.25 mm

30304 A ZKL single-row tapered roller bearing for high combined radial and one-direction axial loads.

25x52x18 mm

2205 ZKL double-row self-aligning ball bearing with a spherical outer-ring raceway to accommodate misalignment and shaft deflection.

20x52x22 mm

F 576208 3304 FAG double-row angular-contact ball bearing carries high radial loads together with axial forces in both directions. Two ball rows provide rigid axial location and the ability to support tilting moments in a compact unit. It suits positions where a single-row ball bearing does not provide sufficient axial capacity. F 576208 is a special FAG production designation; compare the complete code with the original part before substitution.

20x52x15 mm

6304 Z ZKL deep-groove ball bearing is a single-row radial bearing with a non-contact metal shield on one side. It supports radial loads and moderate axial forces in both directions. The Z shield protects one side of the rolling contact while the open side permits lubricant access or machine-integrated sealing.

25x52x15 mm

S 6205 2RS MTM deep-groove ball bearing is a single-row radial bearing with rubber seals on both sides. It carries radial loads and moderate axial forces in either direction. The S prefix forms part of the complete product designation.

25x52x15 mm

The 6205 2Z NSK deep-groove ball bearing is a single-row radial bearing with non-contact metal shields on both sides. The shields help retain lubricant and limit the ingress of common contaminants while maintaining low running friction.

Suitable for electric motors, fans, pumps, gearboxes, conveyors and other rotating equipment. The 2Z suffix denotes two metal shields; this is not a watertight design.

1205 KINEX self-aligning ball bearing has two rows of balls, a cylindrical bore and a common spherical raceway in the outer ring. It accommodates angular misalignment between shaft and housing and operates with low friction, including at higher speeds.

NU 2205 URB single-row cylindrical roller bearing is a separable bearing for high radial loads. The NU design has two integral flanges on the outer ring and a flangeless inner ring, allowing axial displacement of the shaft relative to the housing in both directions.