Bearings, Page 2
Product sorting
List of products
Bearing - 6208 2RS TIMKEN
40 × 80 × 18 mm. The deep-groove ball bearing is a single-row radial bearing with contact rubber seals on both sides. The seals help retain grease and protect the raceways from common dust and moisture. A versatile choice for electric motors, pumps, fans, gearboxes, conveyors and agricultural machinery. It supports radial loads and moderate axial forces in both directions.
Bearing - 32208 FBJ
40 × 80 × 24.75 mm. tapered roller bearing is a separable single-row bearing for high radial loads combined with axial load in one direction. Two bearings in an opposed arrangement are normally used when axial location is required in both directions.
Bearing - 2208 2RSTV SNH
40 × 80 × 23 mm. SNH bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.
Bearing - 6208 2Z C3 SKF
40 × 80 × 18 mm. deep-groove ball bearing is a single-row bearing with steel shields on both sides and C3 radial internal clearance. It carries radial loads and moderate axial loads in both directions and is suitable for higher-speed operation.
Bearing - 31307 MGM
35 × 80 × 22.75 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.
Bearing - 6208 2Z ROLLWAY
40 × 80 × 18 mm. Metal shields on both sides. Single-row deep-groove ball bearing for radial load and moderate axial loads in both directions. Non-contact metal shields retain grease with low friction and protect against ordinary dry contamination.
Bearing - 30208 AP6 ZKL
40 × 80 × 19.75 mm. Single-row tapered roller bearing for high radial loads and axial load in one direction. The cone and cup are separable; the complete AP6 suffix is part of the exact specification and must match the machine documentation.
Bearing - 6208 N ZKL
40 × 80 × 18 mm. Single-row deep groove ball bearing in open design, with a snap-ring groove in the outer ring. Suitable for radial and axial loads in both directions; the N suffix denotes the groove, not an included snap ring.
Bearing - 6307 2RS CX
35 × 80 × 21 mm. Rubber seals on both sides.
Bearing - 32010 X FAG
50 × 80 × 20 mm. Single-row tapered roller bearing with a separable design for high combined radial and one-direction axial loads. Compare the exact X variant with the original part; this product designation does not include XL.
Bearing - 32010 JR DPI
50 × 80 × 20 mm. Single-row tapered roller bearing for high radial load combined with axial load in one direction. Its separable design allows the inner ring with rollers and the outer ring to be mounted independently.
Bearing - NJ 307 URB
35 × 80 × 21 mm. single-row cylindrical roller bearing is designed for high radial loads and can also locate the shaft axially in one direction. Its separable construction allows the inner ring to be installed independently of the outer ring and roller assembly.
Bearing - 6307 2RSR KINEX
35 × 80 × 21 mm. single-row deep groove ball bearing with contact rubber seals on both sides. A dependable choice for radial and bidirectional axial loads where retaining lubricant and protecting the bearing interior from contamination are important.
Bearing - NU 2208 E DPI
40 × 80 × 23 mm. Single-row cylindrical roller bearing for high radial loads. The NU design allows axial displacement of the shaft relative to the housing in both directions; E denotes an increased-capacity internal design.
Bearing - 6208 2RSR KINEX
40 × 80 × 18 mm. deep groove ball bearing has contact rubber seals on both sides, helping retain lubricant and protect the raceways against contamination and moisture.
Bearing - 6307 Z ZKL
35 × 80 × 21 mm. deep groove ball bearing has a non-contact metal shield on one side. The shield limits the ingress of larger contaminants and lubricant loss while retaining low friction; the opposite side remains open.
Bearing - 6307 2RS C3 ZKL
35 × 80 × 21 mm. Rubber seals on both sides. Greater radial internal clearance.
Bearing - 30307 A ZKL
35 × 80 × 22.75 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.