Bearings, Page 2
Product sorting
List of products
Bearing - SS 6200 2RS CX
10 × 30 × 9 mm. Rubber seals on both sides.
Bearing - 638 2RS KBS
8 × 28 × 9 mm. single-row deep-groove ball bearing with rubber seals on both sides for improved protection of the lubricant and raceways in normally dusty or damp operation.
Bearing - 6002 ZKL
15 × 32 × 9 mm. is an open single-row deep-groove ball bearing with low friction for radial and limited axial loads in both directions. Its compact dimensions suit small electric motors and general machinery positions.
Bearing - 6200 2RS ZVL
10 × 30 × 9 mm. is a single-row deep-groove ball bearing with contact rubber seals on both sides. It supports radial and limited axial loads while protecting the lubricant and raceways in commonly contaminated operation.
Bearing - 6906 ZZ IBB
30 × 47 × 9 mm. Thin-section single-row deep groove ball bearing with metal shields on both sides. Its compact cross-section, low friction and two-sided protection suit space-constrained rotating arrangements.
Bearing - 6002 2RS TIMKEN
15 × 32 × 9 mm. is a single-row deep-groove ball bearing with contact seals on both sides. The seals help retain lubricant and protect the rolling space from dust, moisture and other common contaminants. Its versatile design supports radial load and moderate axial loads in both directions. It is well suited to applications where dependable bearing protection and low maintenance requirements are important.
Bearing - 61905 2RS1 SKF
25 × 42 × 9 mm. Rubber seals on both sides.
Bearing - 61905 2RS KINEX
25 × 42 × 9 mm. The thin-section deep-groove ball bearing is a compact single-row bearing with contact rubber seals on both sides. It combines a small radial cross-section and low weight with the ability to support radial loads and moderate axial forces in both directions. Suitable for small electric motors, instruments, gearboxes, robotics and other mechanisms with restricted radial space.
Bearing - 61904 2RS EZO
20 × 37 × 9 mm. deep-groove ball bearing is a single-row bearing with contact rubber seals on both sides. It carries radial loads and moderate axial loads in both directions, while the factory grease is protected against leakage and common contaminants.
Bearing - 51102 URB
15 × 28 × 9 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
Bearing - 61811-2RZ SKF
55 × 72 × 9 mm. Thin-section single-row deep groove ball bearing 61811 2RZ SKF with low-friction seals on both sides. It combines a compact radial section with low friction and carries radial loads plus axial loads in both directions.
Bearing - 6200 2Z FLT
Dimensions: 10 × 30 × 9 mm. Deep groove ball bearing, shielded on both sides (2Z).
Bearing - 6002 2Z SKF
15 × 32 × 9 mm. Single-row deep groove ball bearing, shielded on both sides (2Z).
Bearing - 51100 STEYR
10 × 24 × 9 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
Bearing - 6200 Z SKF
10 × 30 × 9 mm. SKF bearing with the complete designation. When selecting a replacement, compare the full designation, dimensions and design required for the application.
Bearing - 51100 ZVL
10 × 24 × 9 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.
Bearing - 6002 2Z NSK
15 × 32 × 9 mm. Single-row deep groove ball bearing, shielded on both sides (2Z).
Bearing - 61904 2Z (6904 2Z) CRAFT
20 × 37 × 9 mm. Metal shields on both sides.