Bearings, Page 33

Bearing - 51114 FAG

70 × 95 × 18 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.

Bearing - 3207 A 2RS1TN9 MT33 SKF

35 × 72 × 27 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.

Bearing - 32010 X FAG

50 × 80 × 20 mm. Single-row tapered roller bearing with a separable design for high combined radial and one-direction axial loads. Compare the exact X variant with the original part; this product designation does not include XL.

Bearing - 32010 JR DPI

50 × 80 × 20 mm. Single-row tapered roller bearing for high radial load combined with axial load in one direction. Its separable design allows the inner ring with rollers and the outer ring to be mounted independently.

Bearing - 2205 E 2RS1TN9 SKF

25 × 52 × 18 mm. SKF bearing for industrial applications. When replacing a part, always verify the complete designation, dimensions, design and application requirements against the manufacturer documentation.

Needle roller bearing - GB 1816 TOR2S TORRINGTON

GB1816 Torrington needle roller and cage assembly without seal, weight 0.048 kg. (d 28.575 × D 34.925 × B 25.4 mm).

Bearing - NUP 206 E ZVL

30 × 62 × 16 mm. single-row cylindrical roller bearing carries high radial loads and locates the shaft axially in both directions through its flange arrangement. The E suffix denotes an optimized internal design with increased load capacity.

Bearing - NJ 307 URB

35 × 80 × 21 mm. single-row cylindrical roller bearing is designed for high radial loads and can also locate the shaft axially in one direction. Its separable construction allows the inner ring to be installed independently of the outer ring and roller assembly.

Bearing - NA 4907 DKF

35 × 55 × 20 mm. needle roller bearing with machined rings and its own inner ring provides high radial load capacity within a small radial section. It is suitable where the shaft surface cannot be used directly as a precision raceway.

Bearing - 6301 Z ZKL

12 × 37 × 12 mm. single-row deep groove ball bearing with a non-contact metal shield on one side. Suitable for radial and moderate axial loads in both directions when one side of the bearing needs protection from coarse contamination.

Bearing - 6207 RS ZKL

35 × 72 × 17 mm. single-row deep groove ball bearing with a contact rubber seal on one side. Suitable for radial and moderate axial loads in both directions when one side requires improved protection from dust, contamination and lubricant loss.

Bearing - 6201 FAG

12 × 32 × 10 mm. single-row deep groove ball bearing in an open design is a versatile choice for radial loads and moderate axial loads in both directions. It offers low friction and smooth running.

Bearing - 607 ZZ DPI

7 × 19 × 6 mm. Metal shields on both sides.

Bearing - 51105 P6 ZKL

25 × 42 × 11 mm. thrust ball bearing is designed to carry axial load in one direction. It is used where force acting along the shaft axis must be reliably supported.

Bearing - 32305 A ZKL

25 × 62 × 25.25 mm. Technické provedení a kompatibilitu ověřte podle úplného označení výrobce a požadavků aplikace.